Table of Contents
Advertisement
INSTALLING THE BATTERIES
Your PC100 uses two AA alkaline batteries for power.
Slide the battery cover off and insert two AA
batteries as shown. Replace the cover.
NOTE
NOTE
4
When inserting the batteries, be sure the
negative (-), or flat end of each battery is
inserted toward the spring.
Your PC100 has an internal, self-charging
standby power supply. For first time use,
leave the PC100 docked in the cradle for
twelve hours with the AC adapter
plugged in and the PC100 turned on.
Standby power provides one minute of
user data retention while the AA batteries
are being replaced.
Advertisement
Table of Contents
