Table of Contents
Advertisement
With Quick View On and Time Stamp Off
1. When the pager receives a message, it beeps (or
vibrates) for about eight seconds.
2. The message automatically
appears on the LCD display.
You don't need to press any keys.
(See "Activating Quick View," page 8.)
If longer than 12 characters, the
second part of the message appears.
The FLX 9050 continuously displays the message,
switching screens every two seconds.
Three minutes later, if no keys are pressed,
the pager beeps (or vibrates) for eight seconds
to remind you of the message.
This repeats every three minutes up to 10 times.
3. Press any key to stop the alert.
The display changes, indicating
you have a message in memory.
This display is also called a
Standby display.
Note: If the pager gets another message before you stop
the alert, you'll get a new alert, the new message
appears, and the previous message is stored in
memory. The Unread Message Reminder
continues until both messages are viewed.
(See "Unread Message Reminder," page 22.)
19
Advertisement
Table of Contents
