Using The Reset Button - Uniden XCA4510 Owner's Manual

Using the Reset Button

The RESET button is used to erase all recorded outgoing messages and any
messages which are saved in memory. Pressing RESET does not erase your
PIN (Personal Identification Number) code or the security code between the
Handset and Base Unit.
When RESET is pressed, the Message Counter
begins to flash. See page 10 "Applying Power to
the Base Unit" for instructions on returning the
system to Standby.
Note: The RESET button may also be used in the unlikely event that an AC
power line disturbance causes the answering system to
malfunction and become inoperative.
RING SW PULSE-TONE CPC REC TIME RING VOL
2-5-TS OFF-ON ANN-1 OFF-LO-HI
60
RESET
RESET
DC IN 9V
TEL-LINE
+ -