UNION GLASHÜTTE/SA UNG-27.S2 User Manual

Table of Contents

Download this manual

TECHNICAL SPECIFICATIONS

• Mechanical movement chronograph UNG-27.S2 with

automatic winding and date corrector at 10 o'clock

• Number of jewels: 29

• 28,800 vibrations/hour

• Power reserve: Approx 65 hours

WWW.UNION-GLASHUETTE.COM

UNG-27.S2

UseR'S MANUAL

1 Hour hand

2 Minute hand

3 Small seconds hand

4 Date indicator

5 Corrector (rapid date correction)

6 Central 60 seconds hand (chronograph)

7 30 minute counter (chronograph)

8 Start/Stop push-button (chronograph)

9 Reset push-button (chronograph)

10 2 position crown*

* In models from the „Sport" series, the crown is also screwed to the

case to ensure increased water resistance. To operate the crown, turn it

counterclockwise until it pops out clearly through the built-in spring. To

screw the crown back on, press it slightly towards the case and turn it

clockwise until it stops. Do not operate the crown under water.

1/2

I Rest and winding position

II Time setting position, with stop second

and midnight date and day chang

Table of Contents

Do you have a question about the UNG-27.S2 and is the answer not in the manual?

Page 1 UNG-27.S2 USER’S MANUAL TECHNICAL SPECIFICATIONS DISPLAY / FUNCTIONS • Mechanical movement chronograph UNG-27.S2 with 1 Hour hand automatic winding and date corrector at 10 o’clock 2 Minute hand • Number of jewels: 29 3 Small seconds hand • 28,800 vibrations/hour 4 Date indicator •...
Page 2 UNG-27.S2 RAPID DATE CORRECTION Press the corrector as many time as needed (5), to move WINDING the disc forward until the desired date (4) is displayed. Dur- ing this operation, your watch will continue running, so the Crown in position I, not pulled out time will not need to be re-set.