1. Manuals
  2. Brands
  3. CENNTRO Manuals
  4. Automobile
  5. LOGISTAR 100 2023
  6. User manual

CENNTRO LOGISTAR 100 2023 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for CENNTRO LOGISTAR 100 2023

Summary of Contents for CENNTRO LOGISTAR 100 2023

  • Page 2 PREFACE Thank you for choosing CENNTRO electric vehicle. In order to use and maintain LOGISTAR 100 Vehicle correctly, please read this Manual carefully before use. This Manual should be considered as one part of the vehicle, which contains the important contents of safety, operation and maintenance in the use of the vehicle, so you should carefully read it.
  • Page 3 Do not refit the vehicle, because the modification of the vehicle, especially the electrical wiring, may cause vehicle failure or other serious accidents (for example: fire). CENNTRO will bear no liability for any loss or accident caused by the modification of the vehicle.
  • Page 4 To users CAUTION • Indicates the matters that will damage the vehicle parts and should be avoided. This safety symbol means "Do not do this" or "Do not let it happen". *This symbol indicates that it is optional or only available in certain markets. Your vehicle may not be equipped with this device.

  • Page 5: Table Of Contents

    Contents 1 General General ································································································· P .01 Overview of the Vehicle ············································································ P .02 2 Instructions on Safety Instructions on Safety ·············································································· P .06 3 Vehicle Identification Number Vehicle Identification Number (VIN) ···························································· P.15 Drive Motor Model and Ex-factory Number ·················································· P.16 Ex-factory Nameplate ··············································································...
  • Page 6 Contents 6 Control Switch, Mechanism and Equipment Control Switches Set on Steering Column ···················································· P .43 Control Switches Set on the Instrument Panel ·············································· P .48 Combination Instrument ·········································································· P .51 Heating/Ventilation System ······································································ P .59 Multimedia System ·················································································· P .64 Other Control Mechanisms and Devices on the Vehicle ··································...
  • Page 7 Contents 9 Vehicle Appearance and Maintenance Interior Cleaning ···················································································P .108 Exterior Cleaning ···················································································P .109 Faults and Emergency Measures Failure to Start the Vehicle ·······································································P .112 Towing ································································································P .112 Reflective Vest ·······················································································P .113 Insufficient Tire Pressure ·········································································P .113 Roadside Assistance Card········································································P .113...

  • Page 8: General

    Please do not refit the vehicle arbitrarily. The modification of the vehicle, especially the electrical wiring, may cause vehicle failure or other serious accidents (for example: fire). CENNTRO will bear no liability for any loss or accident caused by the modification of the vehicle.

  • Page 9: Overview Of The Vehicle

    General Overview of the Vehicle Exterior Front Devices ① Exterior rearview mirror ② Windshield wiper blade ③ Windshield spray nozzle ④ Front combination lamp ⑤ Daytime running lamp ⑥ Front cabin cover ⑦ Front trailer cover plate (front towing point) ⑧...
  • Page 10 General Exterior Rear Devices ① Rear combination lamp ② High brake lamp ③ Back door opening handle ④ Reversing camera ⑤ Rear fog lamp ⑥ Charging port cover plate ⑦ Front door outer handle...
  • Page 11 General Instrument Panel Side Devices ① Sun visor ② ECALL control switch ③ Hazard warning lamp switch ④ Front passenger side window glass lifting switch ⑤ Side air outlet ⑥ Multimedia screen (including reversing camera) ⑦ Onboard power supply ⑧ Startup switch ⑨...
  • Page 12 General ① Front interior lamp control switch ② Central air outlet ③ Front passenger side interior door lock ④ Glove box opening handle ⑤ Air conditioning control panel ⑥ Electronic shifter ⑦ Accelerator pedal ⑧ Brake pedal ⑨ Low beam height adjustment/ESC switch/automatic headlamp switch ⑩...

  • Page 13: Instructions On Safety

    Instructions on Safety Instructions on Safety • Don't put anything near the driver's seat . » If bottles and cans are placed around the driver's seat, the brake pedal cannot be operated or the accelerator pedal cannot be reset. • Place suitable vehicle floor mats. »...
  • Page 14 Instructions on Safety Once the goods deviate, there may be danger when turning. • Doors and window switches and seat adjustment shall be operated by the adults. » In order to avoid pinching children's hands, feet, heads and other body parts, only the adults are allowed to close or adjust the doors, window switches and seats.
  • Page 15 Instructions on Safety • D o n o t p u t y o u r h a n d i n t o t h e steering wheel to operate the switch during driving. » Operation with your hand in the steering wheel will hinder the operation of the steering wheel, causing unexpected accidents.
  • Page 16 » In rainy days, if the ground area is immersed in the bottom of the battery pack, it is strictly prohibited to start the vehicle. Please contact the CENNTRO authorized service center in time. » In winter, the efficiency of the power battery is low. It is recommended that you charge the battery whenever you use it.
  • Page 17 » In order to give full play to the vehicle's performance, reduce accidents and reduce component failures, please use CENNTRO genuine accessories when replacing tires, wheels and wheel mounting nuts. » Please use tires of the specified specification, the same brand and the same tread (groove shape), and do not install tires with significantly different friction levels.
  • Page 18 However, please contact the CENNTRO authorized service center when there are large particles of water drops in the lens or water in the lamp.
  • Page 19 At this time, there is no risk of electric shock when touching the vehicle body or structure in or out of water. » After handling the accident, please contact the CENNTRO authorized service center for maintenance.
  • Page 20 » The power battery used in this vehicle is a lithium-ion power battery, which is installed on the chassis of the vehicle and may cause pollution and harm to the environment if handled arbitrarily. Please consult the CENNTRO authorized service center for details about the disposal of power batteries.
  • Page 21 Instructions on Safety WARNING • Do not distract yourself from driving due to external factors, such as talking with passengers or making phone calls. • Do not drive the vehicle when the reaction ability is reduced, such as taking medicines, alcohol, drugs and other substances that will weaken the reaction ability of people.

  • Page 22: Vehicle Identification Number

    Vehicle Identification Number Vehicle Identification Number (VIN) The vehicle identification number (VIN) is used to register a vehicle and identify the vehicle with this number. This number is respectively: Printed on the body front panel in the engine compartment. Printed on the ex-factory nameplate of the vehicle fixed to the B pillar on the right side of the body.

  • Page 23: Drive Motor Model And Ex-Factory Number

    It is recommended that you copy the number for future use after finding and confirming the above number: If you need to feed back information with CENNTRO authorized service center, please use the above number to indicate your vehicle.

  • Page 24: Main Technical Specifications

    Main Technical Specifications Main Dimension Parameters of the Vehicle Items Parameters Front wheel base(A) 1360 mm (53.5 in.) Rear wheel base(B) 1355 mm (53.3 in.) Body width (C) 1610 mm (63.4 in.) Body height(D) 1722 mm (67.8 in.)
  • Page 25 Main Technical Specifications Items Parameters Body height(without luggage rack) 1689 mm (66.5 in.) Body length(E) 3664 mm (144.3 in.) Body wheelbase(F) 2485 mm (97.8 in.) Cab interior dimensions (width × height) 1315×1330 mm(51.8×52.4 in.) Back door opening area (width × height) 1120×950 mm(44.1×37.4 in.) Front suspension (G) 620 mm (24.4 in.)

  • Page 26: Technical Performance Parameters Of The Whole Vehicle

    Main Technical Specifications Technical Performance Parameters of the Whole Vehicle Items Specifications/Parameters Vehicle version 15B22AEB 15B22AEC Driving form 4×2 front 4×2 front wheel drive wheel drive Number of passengers (including the driver) Quality Curb weight 920 kg 920 kg parameters ( 2028 lbs.) ( 2028 lbs.) Gross weight...

  • Page 27: Technical Parameters/Specifications Of Main Assemblies

    Main Technical Specifications Items Specifications/Parameters Driving Maximum speed 80 km/h 90 km/h parameters (50 mph) (56 mph) Maximum gradient Electric range (WLTP) 118 km 110 km (73 miles) (68 miles) Electric range city (WLTP) 162 km 148 km (100 miles) (92 miles) Technical Parameters/Specifications of Main Assemblies Items...
  • Page 28 Main Technical Specifications Items Specifications/Parameters Reducer Lubricating oil specification GL-4 75W-90 Single vehicle filling volume 0.7 L(0.18 us gal ) Speed ratio D gear/R gear 8.24/8.24 Power Type Lithium iron phosphate battery battery Capacity 138.5 Ah Total battery voltage 115.2 V Model VWU-3K3S115BSF0000 Model...
  • Page 29 Main Technical Specifications Items Specifications/Parameters Brake Braking type Service Hydraulic system braking Parking Mechanical braking Front brake Disc brake Rear brake Disc brake Front and rear brake Front disc brake: dimensions 231 mm(9.1 in.) Rear disc brake: 217 mm(8.5 in.) Front and rear brake force regulating device Brake fluid...

  • Page 30: Electrical System, Air Conditioning System And Capacity Data

    Main Technical Specifications Items Specifications/Parameters Wheel Specification 175/60 R14 Tire pressure (Front and rear) 230 kPa(2.3 bar) 14×5J Body structure type Bearing type, compartment type, all metal welded structure Electrical System, Air Conditioning System and Capacity Data Specifications/ Items Parameters Electrical Wire connection Single wire system,...
  • Page 31 Main Technical Specifications Specifications/ Items Parameters Electrical Rear Brake lamp/ 12V，21/5W system combination rear position lamp lamp Reversing lamp 12V，21W Rear turn signal 12V，21W lamp Rear fog lamp 12V，21W High brake lamp 12V，LED Structure type Front mounted (built-in conditioning dashboard) system Compressor Refrigerating capacity is...

  • Page 32: Instructions Before Driving

    CENNTRO authorized service center through this number when matching the key. It is recommended that you copy the number in the following table for future use after finding and confirming the above number: Key No.

  • Page 33: Door Lock

    Instructions Before Driving Door Lock Front Door Lock When locking the left front door (driver's door), inser t the key into the lock cylinder and turn it counterclockwise; turn clockwise when unlocking. There is a locking button on the inner handle of the left and right front doors respectively.
  • Page 34 Instructions Before Driving WARNING • The key is only used to open the door lock, not the back door, otherwise the key may be broken in the lock. • When opening the back door, press the door with your hand and slowly release it to prevent the back door from bouncing up and causing injury.
  • Page 35 Instructions Before Driving time. At this time, the turn signal lamp flashes once to enter the alert state (indicating that the doors are completely locked). » If the door is not completely closed, press the“ ”key on the remote control, and the turn signal lamp flashes 4 times continuously to remind the user to close the door again and not enter the alert state.

  • Page 36: Lifting Of Window Glass

    Instructions Before Driving door is locked within 10 seconds, the turn signal lamp will no longer flash continuously. Lifting of Window Glass For vehicle models equipped with electric window switch, the window glass can be raised or lowered by pulling or pressing the window switch on the door trim panel outside the seat.

  • Page 37: Seat Adjustment

    Instructions Before Driving There is a locking switch ④ on the driver's door to lock the passenger side window glass. When the "lock" side of the switch is pressed, the operation of switches ② and ③ cannot raise or lower the window glass on their respective sides. To restore normal operation, press the locking switch again to unlock.
  • Page 38 Instructions Before Driving • Adjust the backrest position » Pull up the release handle on the outside of the seat to rotate the backrest to the required position by pressure; release the handle, and the backrest will be locked in the required position.

  • Page 39: Rearview Mirror

    Instructions Before Driving Rearview Mirror The exterior rearview mirror of this vehicle is a manually adjustable exterior rearview mirror. If necessary, the lens can be directly adjusted by hand and manually folded. Before driving, make sure that the exterior rearview mirror has been adjusted to the best angle of vision and field of vision.

  • Page 40: Safety Belt Of The Seat

    Instructions Before Driving Safety Belt of the Seat General The seats of the vehicle are equipped with three-point safety belts with automatic retractors. NOTICE • Proper use of safety belt can significantly reduce personal injury. • Please wear the safety belt according to the requirements of this Manual. •...
  • Page 41 • Fasten the safety belt even if the knot of the safety belt cannot be untwisted. At this time, do not attach the knotted part of the safety belt directly to the human body. Immediately go to the CENNTRO authorized service center for maintenance to eliminate the twisting.
  • Page 42 • All safety belts damaged or stretched due to accidents must be replaced at the CENNTRO authorized service center in time, even if there is no obvious damage. At the same time, check whether the fixing device of the safety belt is damaged.
  • Page 43 Instructions Before Driving Safety Belt Unfastened Warning Lamp If the driver or the front passenger does not wear a safety belt when the start switch is turned on, the warning lamp of unfastened safety belt in the combination instrument lights up to remind you to fasten your safety belt.
  • Page 44 Instructions Before Driving Wear Safety Belt of the Seat WARNING • Make sure that all passengers wear safety belts correctly each time they ride. • If you do not wear the safety belt correctly, you will not get the necessary safety protection in the event of an accident.
  • Page 45 Instructions Before Driving Adjust the Height of the Safety Belt The front seat safety belt is equipped with a safety belt height adjustment device. The height of the safety belt can be adjusted by adjusting the upper lock pin of the safety belt to make the safety belt lap the center of the outer shoulder.
  • Page 46 CENNTRO authorized service center. Otherwise, the safety belt may be damaged. In case of an accident, the...

  • Page 47: Pedestrian Warning Buzzer

    • In order to ensure that the safety belt retractor can give full play to its protective role and environmental protection requirements, relevant regulations must be observed when handling relevant components. For relevant information, please consult the CENNTRO authorized service center. Pedestrian Warning Buzzer When the vehicle speed is below 20 km/h (12.4 mph), the pedestrian...
  • Page 48 If the ESC indicator lamp remains on during driving, it indicates that the ESC system has failed, and the vehicle should drive to the nearest CENNTRO authorized service center at low speed for maintenance. ESC Function Off Each time the motor is started, the ESC function will start automatically.
  • Page 49 Instructions Before Driving WARNING • The electronic stability system (ESC) has certain limitations on the vehicle's driving stability control. Even if the vehicle is equipped with an electronic stability system (ESC), the driving mode should be adjusted at any time according to the road conditions and traffic conditions.

  • Page 50: Control Switch, Mechanism And Equipment

    Control Switch, Mechanism and Equipment Control Switches Set on Steering Column NOTICE • To reduce the possibility of injury, do not operate the switch by passing your hand through the center of the steering wheel. There are five types of control switches set on the steering column of the vehicle. The operation and use of each switch are described as follows: Ignition Switch (Main Power Switch) There are three gear positions on the ignition switch (the indicator of gear position...
  • Page 51 Control Switch, Mechanism and Equipment NOTICE • During driving, do not turn or pull out the ignition key at will, because the steering wheel will be locked and you will lose the ability to control the vehicle. • Do to leave children alone in the vehicle. If necessary, you take away the key. Unattended children may start the vehicle and cause personal injury.
  • Page 52 Control Switch, Mechanism and Equipment » Continue to pull the light control lever backward (if you release it, it will return), and the headlamp will also turn on the high beam (dimming state). Dimming control is not controlled by the ignition switch and other light control switches. •...
  • Page 53 Control Switch, Mechanism and Equipment Hazard Warning Lamp Switch Press the hazard warning lamp switch, all turn signal lamps on the vehicle will be turned on at the same time, which plays the role of warning other vehicles. Press this switch again to turn off the light.
  • Page 54 Control Switch, Mechanism and Equipment ③ "LO" gear: when the control lever is turned to this gear, the wiper is in the low speed operation state. ④ "HI" gear: when the control lever is turned to this gear, the wiper will be in the high speed operation state.

  • Page 55: Control Switches Set On The Instrument Panel

    Control Switch, Mechanism and Equipment Horn Control Switch Press the horn button on the steering wheel, and the horn will sound. Control Switches Set on the Instrument Panel Headlamp Axis Position Adjustment Switch The illumination height of the low beam lamp can be adjusted by adjusting the switch knob.
  • Page 56 Control Switch, Mechanism and Equipment AUTO Switch When the key is in the ON gear, press the AUTO switch, and the working indicator lamp on the switch will light up (red), which can turn off the automatic function. Sundries Box Pull the release handle on the box cover outward to open the glove box, and push the box cover upward to...
  • Page 57 Control Switch, Mechanism and Equipment • When the vehicle is in the charging state, the instrument displays that the current gear signal is always N regardless of the gear position of the shifter. • When the vehicle is in the forward direction, the gear can be freely switched between D gear and S gear without stepping on the brake.

  • Page 58: Combination Instrument

    Control Switch, Mechanism and Equipment Combination Instrument T h e v e h i c l e i s e q u i p p e d w i t h a combination instrument as shown in the figure. Tachometer ①...
  • Page 59 Control Switch, Mechanism and Equipment Trip Computer Display The contents displayed on the trip computer include: ① Clock display. ② Gear information: display the current gear of the vehicle. N neutral gear, R reverse gear, D drive gear, S sport gear;...
  • Page 60 Control Switch, Mechanism and Equipment Press the Key to adjust the display information: Short press: press for less than 1s. Long press: press for more than 1s. Timeout: no key operation within 5s, i.e. the current state is maintained. • Left key function •...
  • Page 61 Tire Pressure Monitoring Indicator Lamp During driving, if this lamp is on, it indicates that the tire pressure system has failed, please go to the CENNTRO authorized service center for inspection and repair as soon as possible. If this lamp flashes, it indicates that a tire may have faults such as under pressure, over pressure or over temperature;...
  • Page 62 If the warming lamp is on during driving, please pull over and stop to ensure safety and contact the CENNTRO authorized service center for maintenance, inspection and treatment.
  • Page 63 When the temperature of the motor system is too high, the warming lamp will turn on. If the warming lamp turns on during driving, please pull over and stop to ensure safety, and contact the CENNTRO authorized service center for maintenance, inspection and treatment.
  • Page 64 12V Battery Fault Warning Lamp If the 12V battery or the DC-DC system has a fault, the 12V battery fault warning lamp will turn on. If the indicator lamp is on, please contact the CENNTRO special dealer for maintenance as soon as possible.
  • Page 65 Control Switch, Mechanism and Equipment Ready Indicator Lamp When the ignition switch is in the "ON" position, this lamp will light up, indicating that the vehicle is ready for normal driving. If this lamp does not light up, it indicates that the vehicle has a fault or the user has misoperated.

  • Page 66: Heating/Ventilation System

    Control Switch, Mechanism and Equipment ESC Fault Warning Lamp When the ignition switch is turned to the "ON" position, this lamp will flash and then go out, indicating that the ESC system self inspection is normal. If this lamp stays on or suddenly turns on during driving, the ESC system may have a fault.
  • Page 67 Control Switch, Mechanism and Equipment The air conditioning controller is shown in the figure below: ① Temperature knob » It is used to control the air supply temperature of the heater (when it is rotated to the right, it is the coldest (blue), and when it is rotated to the left, it is the hottest (red).
  • Page 68 Control Switch, Mechanism and Equipment ⑨ Internal and external air circulation buttons » Press the button to select whether the output air of the heater is internal circulation (air circulates in the vehicle) or the button pops up to enter the external circulation (external fresh air is introduced) mode.
  • Page 69 Control Switch, Mechanism and Equipment • Demisting » Turn ③ mode knob to ⑧ defrosting mode, operate ⑨ internal and external circulation button to reach external circulation mode, turn ① temperature knob to a comfortable position, and turn ② air speed knob to high speed. When the windshield becomes clear, the fan speed and heating temperature can be reduced.
  • Page 70 Control Switch, Mechanism and Equipment NOTICE • Refrigerant is a substance that can easily absorb heat. When exposed to the air, it will immediately freeze any object surface in contact with it, including your eyes. Therefore, when checking and repairing the air conditioning system, you should pay special attention to avoid contact with it.

  • Page 71: Multimedia System

    Control Switch, Mechanism and Equipment NOTICE • In order to eliminate the dirty air in the vehicle, temporarily move the air input control key to the "fresh air" position, but remember to move the key back to the "internal circulation air" position after ventilation, and then turn on the air conditioner.
  • Page 72 Control Switch, Mechanism and Equipment The homepage interface has eight functions: • Radio • Bluetooth Phone • Bluetooth Music • Mobile phone interconnection • Rear view image • System setup • USB • User manual Tip: BT will be used as the abbreviation of Bluetooth in the following text. Radio The radio supports listening to FM and AM radio programs.
  • Page 73 Control Switch, Mechanism and Equipment BT Settings and BT Phone Turn on the Bluetooth function of the mobile phone, search for the Bluetooth name of the machine (LS100-xxxx). Click the device name to connect. Click the Bluetooth disconnect icon to disconnect the Bluetooth connection. Tips: •...
  • Page 74 Control Switch, Mechanism and Equipment Phonelink The mobile phone interconnection function is the function of information interaction between the in-vehicle device and the smar tphone. This function enables the screen of the mobile phone to be projected on the in-vehicle device, and the mobile phone information can be viewed more clearly from the in-vehicle device.
  • Page 75 Control Switch, Mechanism and Equipment • Sound and effect » C l i c k o n t h e S o u n d b a l a n c e settings to set the balance of the front, rear; left and right of the speaker;...
  • Page 76 Control Switch, Mechanism and Equipment » Click System Settings to view MCU version, hardware information, system version, Bluetooth version. Click Factory reset to restore the default state. When a USB device is inserted into the USB interface, the system automatically switches to the USB mode and automatically plays the media files in the USB device.

  • Page 77: Other Control Mechanisms And Devices On The Vehicle

    Control Switch, Mechanism and Equipment Other Control Mechanisms and Devices on the Vehicle Cup Holder The console trim cover can be used to fix the cup. WARNING • It is not suitable to place the cup containing hot water, or hard, sharp and fragile objects in the cup holder, because these objects may be thrown out when the vehicle suddenly stops or crashes, causing injury to passengers.
  • Page 78 Control Switch, Mechanism and Equipment Handrail The handrail is used to provide convenience for passengers. WARNING • Do not hang objects on the handrail. They may affect the driver's vision and cause accidents. When the vehicle bumps or an accident occurs, the shaking objects may be thrown out and hurt passengers.
  • Page 79 Control Switch, Mechanism and Equipment • When loading long boards, surfboards, etc., the front and rear ends should be firmly fixed, and the paint on the roof should be carefully protected from scratches. • Before moving, carefully check whether the objects are firmly fixed. WARNING •...
  • Page 80 ℃ /167 ℉ ) and the over temperature protection of the charging control box. It is recommended to replace the power supply socket and go to the CENNTRO authorized service center for inspection if necessary to avoid safety problems. 3) Open the cover plate of vehicle slow charging port and open the cover. Make...
  • Page 81 Control Switch, Mechanism and Equipment 4) Connect the charging gun to the vehicle slow charging port. At this time, the charging cable connection indicator lamp on the combination instrument is on. The charging cable connection indicator lamp is always on during the charging process and it will go out only after the charging gun is unplugged.
  • Page 82 Control Switch, Mechanism and Equipment 8) Pull out the three core plug of the charging cable. NOTICE • When the three core plug of the charging cable is not unplugged, it is strictly forbidden to put your finger into the plug of the charging gun. •...
  • Page 83 Control Switch, Mechanism and Equipment 3) Open the cover plate of the charging port. 4) Connect the charging gun of the AC charging pile with the slow charging port on the vehicle, and connect the charging gun of the power supply end with the charging port on the slow charging pile.
  • Page 84 Control Switch, Mechanism and Equipment CAUTION • Please choose to charge in a relatively safe environment (such as avoiding liquids, ignition sources, etc.). • Do not modify or disassemble the charging equipment and related ports, which may lead to charging failure and fire. •...
  • Page 85 Control Switch, Mechanism and Equipment NOTICE • When the lamp in the combination instrument is on, it indicates that the power battery system is low. Please charge it as soon as possible. It is not recommended to charge after the battery is completely exhausted, otherwise the service life of the battery system will be affected.
  • Page 86 Control Switch, Mechanism and Equipment WARNING • The power battery will self discharge during the shelving process. When the user shelves the power battery, ensure that the power battery is in the semi electric state (50%~60%). It is suggested that the user should not shelve the power battery for too long, at most not more than three months.
  • Page 87 Control Switch, Mechanism and Equipment NOTICE • The number of doors related to the operation of interior lamp switch is related to the specification of the vehicle. If the rubber button can be seen on the door frame when opening the door, the door is related to the interior lamp switch operation.
  • Page 88 Control Switch, Mechanism and Equipment WARNING • Before driving, check whether the engine compartment cover is locked firmly, otherwise, during driving, the engine compartment cover lifted by external force will affect the driver's vision and easily cause accidents. Cigar Lighter or Standby Power Socket Due to different vehicle configurations, the central panel of the instrument panel is equipped with a cigarette...
  • Page 89 Control Switch, Mechanism and Equipment Tow Hook The tow hook is located in the tool kit under the driver's seat. Take out the tow hook and install it as follows: 1. Use a slotted screwdriver wrapped with soft cloth to pry open the trailer hole cover at the front right of the vehicle.
  • Page 90 Control Switch, Mechanism and Equipment Parking Brake Handle When the vehicle is parked, the parking brake handle must be pulled up to make the rear wheel brake work. The driver shall release the handle before starting the vehicle. When releasing the handle, you should pull it up slightly, and press the lock button at the top of the handle with your thumb to release...
  • Page 91 Control Switch, Mechanism and Equipment and the motor output power and speed will increase accordingly. CAUTION • Do not step down the pedal quickly to avoid damaging the parts and increasing the power consumption. Emergency Call System (ECALL) In case of an accident, you can call the public security response center through the emergency call system and send the location information to the public security response center.

  • Page 92: Essentials On Driving

    Essentials on Driving Inspection Before Driving In order to ensure the service performance of the vehicle and improve the reliability and service life of the vehicle, the capacity of various oils and fluids shall be checked before driving the vehicle. If the capacity is insufficient, relevant oils and fluids shall be added as required, which shall comply with the relevant provisions in Chapter 4: •...

  • Page 93: Starting And Driving

    Essentials on Driving Starting and Driving Before starting, observe whether there are pedestrians and other vehicles around your vehicle. Step down the brake pedal, the instrument will display "READY", and turn the gear into D or R. After shifting into gear, release the parking brake handle and then the brake pedal, and the vehicle will start to drive.

  • Page 94: Braking

    Essentials on Driving Braking Your vehicle's braking system is equipped with ABS (anti-lock braking system). When braking, it can prevent the wheels from locking, prevent the wheels from slipping on the ground (especially when the front wheels are locked, the direction is easy to lose control), and improve the safety performance of the vehicle.

  • Page 95: Driving In Snow And Ice

    Essentials on Driving WARNING • When the vehicle is going down a long or steep slope, it is not allowed to step on the brake pedal for a long time or too frequently, otherwise the vehicle brake will overheat and work abnormally, or even cause the vehicle to lose control.

  • Page 96: Precautions For High-Speed Driving

    Essentials on Driving CAUTION • When the vehicle passes through the waterlogged road, the wading depth shall ensure that the motor system and power battery system will not be flooded, otherwise these systems will be seriously damaged and may cause fatal accidents.
  • Page 97 Essentials on Driving • Maintain normal tire pressure » Insufficient tire pressure will increase the rolling resistance, resulting in increased energy consumption. Therefore, normal tire pressure should be maintained according to the provisions of this User Manual.

  • Page 98: Maintenance And Inspection

    Maintenance and Inspection Safe Maintenance It is forbidden to work in the front engine compartment when the power system is started! Be careful when working in the front engine compartment or on the motor! The following items must be observed before working in the front engine compartment: •...
  • Page 99 Any operation of high-voltage power system can only be carried out by the professional technicians of the dealer with professional qualification specially authorized by CENNTRO according to the guidelines. • Turn off the starting state of the power system before operation, pull out the ignition key and prohibit charging.

  • Page 100: Regular Maintenance Form

    CAUTION • Parts must be replaced sometimes during vehicle maintenance. You should go to the CENNTRO authorized service center to select the authentic supporting spare parts of CENNTRO vehicles, and no fake or inferior products should be used.
  • Page 101 Maintenance and Inspection Note: ● indicates replacement ○ indicates inspection —indicates there is no descriptio First maintenance Regular maintenance 10000 km (6200 miles) 10000 km (6200 miles) Regular /12 months /12 months Additional maintenance maintenance (Subject to the (Since last items purchase invoice) maintenance)
  • Page 102 Maintenance and Inspection First maintenance Regular maintenance 10000 km (6200 miles) 10000 km (6200 miles) Regular /12 months /12 months Additional maintenance maintenance (Subject to the (Since last items purchase invoice) maintenance) Whichever comes first Whichever comes first *4. Leakage ○...
  • Page 103 Maintenance and Inspection First maintenance Regular maintenance 10000 km (6200 miles) 10000 km (6200 miles) Regular /12 months /12 months Additional maintenance maintenance (Subject to the (Since last items purchase invoice) maintenance) Whichever comes first Whichever comes first III. Chassis, Vehicle Body Accessories 8.
  • Page 104 Maintenance and Inspection First maintenance Regular maintenance 10000 km (6200 miles) 10000 km (6200 miles) Regular /12 months /12 months Additional maintenance maintenance (Subject to the (Since last items purchase invoice) maintenance) Whichever comes first Whichever comes first 13. Inspection ○...
  • Page 105 Maintenance and Inspection First maintenance Regular maintenance 10000 km (6200 miles) 10000 km (6200 miles) Regular /12 months /12 months Additional maintenance maintenance (Subject to the (Since last items purchase invoice) maintenance) Whichever comes first Whichever comes first 17. Check ○...

  • Page 106: Contents Of Regular Inspection

    Contents of Regular Inspection CAUTION • Parts must be replaced sometimes during vehicle maintenance. You should go to the CENNTRO authorized service center to select the authentic supporting spare parts of CENNTRO vehicles, and no fake or inferior products should be used.
  • Page 107 Check whether the power battery and high-voltage line are damaged by scratching. If they are damaged, please confirm whether they may cause leakage accidents. Please send them to the CENNTRO authorized service center for inspection and repair, and check whether the insulation capacity meets the requirements.
  • Page 108 Maintenance and Inspection Door Lock Inspection Check the door lock to ensure it is locked normally. Rearview Mirror Inspection Check and adjust the angle of the rearview mirror to ensure that objects behind the vehicle can be clearly seen from the driver's seat. Check the Back Reflector and Vehicle License Plate Check whether the back reflector and vehicle license plate are covered with dust or damaged, and ensure that the license plate is firmly installed and the words and...
  • Page 109 • Brake » If the stroke of the brake pedal needs to be adjusted, or the brake system has the following problems, you should immediately consult the CENNTRO authorized service center or ask for maintenance:...
  • Page 110 20~25 kg(44~55 lbs.); When the handle is completely released to the original position, the braking effect shall be released. If there are problems in the above process, CENNTRO authorized service center shall be entrusted for maintenance.
  • Page 111 Maintenance and Inspection • Check the tires for abnormal (or uneven) wear, cracks, and damage. If the tire is abnormally worn, it should be repaired. If the tire is cracked or damaged, it should be replaced with a new tire. •...
  • Page 112 Maintenance and Inspection WARNING • Because the battery will produce flammable hydrogen gas, it must be kept away from flame or spark, otherwise it may cause explosion. It is very dangerous to spill battery liquid into eyes or onto skin. Special attention shall be paid.
  • Page 113 Maintenance and Inspection Fuse Box There are two fuse boxes for electrical components: the front compartment fuse box is located at the upper left corner of the front compartment, and the instrument panel fuse box is located below the driver's side instrument panel. When replacing the fuse, open the fuse box cover, pull out the fuse, and select the appropriate fuse according to the data listed in the fuse box.
  • Page 114 » The installation shall be performed in reverse order. CAUTION • After replacing the headlamp, readjust the beam angle. If the headlamp is replaced by yourself, you should go to the CENNTRO authorized service center for adjustment. • Turn signal lamp, rear combination lamp and license plate lamp »...

  • Page 115: Vehicle Appearance And Maintenance

    Vehicle Appearance and Maintenance Interior Cleaning CAUTION • When cleaning the interior and exterior surfaces of the cab, volatile solvents, such as metal paint thinner, gasoline, oil, benzene or the following cleaning substances, such as bleaching powder, strong household cleaning agent, etc., shall not be used.

  • Page 116: Exterior Cleaning

    Vehicle Appearance and Maintenance • Luggage compartment » The luggage compartment should be cleaned frequently. If the luggage compartment is filled with fluid or liquid that is easy to spill or leak, after taking out the cargo, carefully check whether the luggage compartment is dirty and clean it in time.
  • Page 117 Vehicle Appearance and Maintenance • Clean the vehicle » When cleaning the vehicle body, please follow the steps below: 1) Use high pressure water to flush the vehicle body surface and wash away mud and debris. Use plenty of water to loosen the dirt and wash it away. 2) The water used for vehicle washing shall flow continuously, or with the help of sponge, soft brush or similar items containing water, but it is not allowed to scrub the vehicle body with rigid items such as foam plastic to avoid damaging...
  • Page 118 Vehicle Appearance and Maintenance WARNING • After washing the vehicle, check whether the brake is dry. If it is not dry, drive at low speed and brake slightly continuously to dry it. • When cleaning the parts with sharp corners such as the lower part of the vehicle and the guard board, you should wear gloves and long sleeves to prevent hands and arms from being injured.

  • Page 119: Faults And Emergency Measures

    • Check whether the gear shift knob is turned to "N" gear and the word "READY" appears on the combination instrument. If not, there is a problem with the drive circuit, please contact the CENNTRO authorized service center for maintenance as soon as possible.

  • Page 120: Reflective Vest

    At this time, there is no risk of electric shock when touching the vehicle body or structure in or out of water. • After handling the accident, please contact the CENNTRO authorized service center for maintenance. Reflective Vest The reflective vest is stored in the glove box or the multi-function storage box on the front passenger side.
  • Page 121 Faults and Emergency Measures Vehicle Information Form for Roadside Assistance Vehicle Information Form for Roadside Assistance The Vehicle Information Form for Roadside Assistance is used to facilitate rescue personnel to quickly understand the vehicle structure and potential threats, improve rescue efficiency and avoid secondary accidents when serious accidents occur. The Vehicle Information Form for Roadside Assistance is stored in the glove box or multi-function storage box on the right side of the instrument panel along with the User Manual.
  • Page 122 Index General P .01 Braking P.87 Heating/Ventilation System P .59 Combination Instrument P.51 Contents of Regular Inspection P .99 Inspection Before Driving P .85 Control Switches Set on Instructions on Safety P .06 Steering Column P.43 Insufficient Tire Pressure P .113 Control Switches Set on the Instrument Panel P.48...
  • Page 123 Index Ramp Driving – anti-slip Function P.87 Rearview Mirror P.32 Reflective Vest P .113 Regular Maintenance Form P .93 Roadside Assistance Card P .113 Safe Maintenance P .91 Safety Belt of the Seat P.33 Seat Adjustment P.30 Start the Vehicle P.85 Starting and Driving P.86...

Table of Contents