Interactive Technologies CueServer 3 Flex Installation Manual

Overview

CueServers are powerful lighting control and show
playback processors designed to be completely
self‑contained and extremely cost effective. Available
in a series of models, these powerhouse controllers
provide limitless solutions to the lighting professional.

Mounting

CueServer 3 Flex can be mounted in a variety
of ways. See corresponding images to the
right.

Desktop Mounting

CueServer 3 Flex comes with small
rubberized feet that allow it to be
securely placed on a desktop, rack shelf,
or tray.

Panel Mounting

CueServer 3 Flex can be securely
panel mounted by using the included
side flanges. To attach the flanges to
CueServer 3 Flex, use the provided
screws. The flanges include various holes
that can be used with screws, zip-ties,
etc. to mount CueServer 3 Flex to a panel
surface.

DIN Rail Mounting

CueServer 3 Flex can be secured
horizontally onto standard DIN Rail by
using the included spring‑loaded clips.
Use the included screws to attach the
clips to the bottom of CueServer 3 Flex.
Please note that DIN Rail is not included
and must be provided by the customer.

Safety Instructions

• Read and follow all safety instructions.
• Save these instructions and deliver to owner
after installation.
• Installation and service should be performed
by qualified person(s).
• Disconnect or turn off power before
installation or servicing.
• Product must be grounded using the
provided grounding attachment point.
• Verify supply voltage with product
specifications before applying power.
CueServer 3 Flex
Installation Guide
• Do not exceed maximum wattage, ratings, or
published operating conditions of product.
• Do not overload.
• Follow all manufacturer's warnings,
recommendations and restrictions to ensure
proper operation of product.
• Electrostatic Discharge (ESD) can damage
this product. Personal grounding
equipment must be worn during installation
and servicing.
• Do not modify the product.
CueServer 3 Flex
Desktop Mounted
with Bumpon Feet
CueServer 3 Flex
Panel Mounted
with Side Flanges
CueServer 3 Flex
DIN Rail Mounted
with DIN Clips
• Do not use the product for anything other
than its intended use.
• For indoor use only. Not for damp or wet
locations. See data sheet for operating
temperature and humidity conditions.
• Do not use product for life-safety or in any
situation where a product failure could
cause harm to people or property.
• Failure to follow these instructions could
void the product warranty.