Please read the instruction manual carefully and strictly follow the instructions in this manual to use this product. Foxtech will not be liable for any result or loss caused by improper use, installation, assembly or modification of users.
The S-RTK100 can be assembled with the SLAM100, mounted on a backpack, or used alone as a mobile RTK device, providing flexible applications and high accuracy positioning data acquisition.
Aviation Plug Power 12V-20V NOTE ● The S-RTK100 is splash, water, and dust resistant with all ports and protective covers securely attached, and has been tested under controlled laboratory conditions to achieve an IP54 rating in accordance with IEC 60529:2013. Splash, water and dust resistance is not permanent and protection may deteriorate due to daily use.
LTE FDD Rel.13 10Mbps DL/5Mbps UL LTE TDD Rel.13 8.2Mbps DL/3.4Mbps UL GPRS 85.6kbps DL/85.6kbps UL(multi-slot class 12) Antenna Specification Four-arm sinuous antenna Connector Type SMA-J Size 27.5 mm×56 mm Weight 15.3g +/-1 g Color Black 2022 FOXTECH All Rights Reserved 5...
Connected Data Not Ready Flash Com- Flash Read SIM Card Succeeded muni- 4G Connected cate Differential Data Flash Fast No SD Card Flash USB Connected Power Power Working Normal Flash SD Card Writing Error 2022 FOXTECH All Rights Reserved 6...
S-RTK100 User Manual Assembly S-RTK100 With SLAM100 ①Mount the S-RTK100 plate on the back of SLAM100 using six flat- head screws coming with S-RTK100. ②Insert the S-RTK100 downwards into the plate and tighten. 2022 FOXTECH All Rights Reserved 7...
Page 10
Align to the red mark of the aviation port. Aviation Port ④Make sure the power supply of SLAM100 is normal. Long press on the Power button to turn on SLAM100 and after which the SLAM100 will be on and enter working mode. 2022 FOXTECH All Rights Reserved 8...
2) The power bank should support 20V power supply standard (the same as power bank for SLAM100); 3) There is a 1/4 inch screw interface on the bottom of S-RTK100 for centering rod mounting with an adapter. ( The adapter and centering rod are not included in the standard package, please reach to our sales if you need.)
Page 12
S-RTK100 User Manual Mode Switch: Doting by default 1/4 inch screw interface on the bottom 5/8 to 1/4 Adapter Centering Rod Power Bank Recommendation Name Spec Model 20000mAh PD Power Bank Support PD 20V 2A 2022 FOXTECH All Rights Reserved 10...
Please insert the 4G-NanoSIM card and the TF card into S-RTK100 before use. Bluetooth Connection The bluetooth of the phone should be on before connecting with S-RTk100. After opening SLAM GO APP, connect with SLAM100 and enter standby page. Enter SETTING>GENERAL SETTINGS>S-RTK100 SETTING and select the right S-RTK100 bluetooth on the pop-up window to connect.
Page 14
② Do not disassemble the antenna of this equipment. ③ Make sure the S-RTK100 is vertical to the ground (antenna up) when using and placing. ④ Avoid using the S-RTK100 in an environment of obstruction or radio interference.
×2 12000mAh SLAM100+RTK100 6.5h NOTE ● The results is gotten under room temperature and for reference only; ● The results may affected by discharge circle times of the power bank and temperature variance, etc. 2022 FOXTECH All Rights Reserved 13...
S-RTK100 User Manual Clean & Maintenance ①Using soft brush to sweep off dust or dirt on the surface of S-RTK100; ②Using a spray bottle with 30% alcohol content to softly wet a non-woven fabric ( microfiber cloth is better but don't use tissues), and then clean the S- RTK100 body gently to remove liquid or other stains.
Need help?
Do you have a question about the S-RTK100 and is the answer not in the manual?
Questions and answers