Advertisement
Quick Start Guide
ENGLISH
EN
EN
Seal the inner case's wall mounting holes with two rubber plugs.
Repeat steps 3-7 of the Weatherproof Enclosure Kit Wall Mounting
QSG to prepare the AP for pole mounting.
EN
EN
Insert two radome brackets into the slots on the inner case's back
1
panel.
2
Use A, B and C to attach the bracket to the AP.
Note: Make sure the AP is turned off. Disconnect the PoE injector from the
power outlet.
See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.
2/2
Weatherproof Enclosure Kit
Mounting Kit (Sold Separately)
Mounting Preparation
1
x 2
AP and Rotating Bracket Assembly
1
x 2
A
x2
B
x2
C
x2
Repeat
Weatherproof Enclosure Kit
Wall Mounting QSG Steps
3
~
7
2
Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
A
B
C
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ZyXEL Communications ACCESSORY-ZZ0106F
Summary of Contents for ZyXEL Communications ACCESSORY-ZZ0106F
- Page 1 Note: Make sure the AP is turned off. Disconnect the PoE injector from the power outlet. See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings. Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
- Page 2 C on the pole. Do not tighten the bolts too much. See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings. Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
Need help?
Do you have a question about the ACCESSORY-ZZ0106F and is the answer not in the manual?
Questions and answers