Table of Contents
Advertisement
Remote control transmitter RC-251S
Power Button (POWER)
Input Selector Buttons
(CD, PHONO, TUNER, VIDEO-1, VIDEO-2,
TAPE-1, TAPE-2)
Sieep button (SLEEP)
Press to set the power off timer. The sleep timer is a function
which button off the power to the system from the time it is set.
When this button is pressed, "90 MIN" is displayed for 5 seconds,
and the power goes off 90 minutes later. Each time the button is
pressed during 5 seconds,
the timer setting changes,
by 10
minute intervals, such as 80, 70, 60 .... While the sleep timer is
operating, the
indicator is lighted. If the sleep button is
pressed during this time, the amount of time remaining on the
sleep timer its displayed, and if the button is pressed during that
display, 10 minutes will be subtracted from that time.
If the button is pressed when the panel display shows 10 minutes
or less, the sleep timer is cancelled, and the power is not turned
recording begins.
: Interrupts all operations.
Dolby Pro Logic Surround Button
(DOLBY SURROUND)
Delay Time Button (DELAY TIME)
Test Tone Button (TEST)
This operates when Dolby Surround mode has been selected as
the SURROUND MODE. Pink noise is produced in order to match
the volume levels used by the Front, Center, and Rear speakers.
Please follow the procedure described above to do this matching.
Press the TEST button again after finishing adjustment.
m
= The
tape
plays,
moving
from
left tc
|
right, or, in the recording
stand-by
mode, recording begins.
: Fast forward from right to left.
: Fast forward from ieft to right.
v4
Audio Muting Button (MUTING)
This button temporarily switches off the sound from the speaker
or
headphone.
Pressing
this
button
will
operate
the
TX-
SV313PRO
audio muting circuit. The audio muting indicator
"MUTING"
will flash. Pressing the button again or using the
POWER
button on the remote
contro! transmitter to turn the
power on will turn off the audio muting.
Volume Buttons (UP/DOWN)
Advertisement
Table of Contents
