Uniden BC860XLT User Manual page 30

Search Delay
Normally, the scanner will resume searching as soon as a transmission has stopped.
You can program an additional Delay so the scanner waits another 2 seconds before resuming searching.
This allows you to hear a possible replying transmission.
In normal Scan you must program a Delay for each channel that you want it activated.
In Search, Delay is active (or inactive) for all frequencies.
To activate Delay for Search (whether
D
searching or stopped on a frequency),
press .
To deactivate Delay from Search
D
(whether searching or stopped on a
frequency), press .
30