Philips CDC 925 Manual page 7

SELECTING ANOTHER TRACK DURING PLAY (0-9)
e Key in the desired track number (on the current CD);
numbers consisting of two figures must be keyed in within
2 seconds.
— The music stops and a moment later the selected track
begins to play.
You can also select the number by using TRACK I or
ke TRACK,
SELECTING ANOTHER CD DURING PLAY (DISC SELECT)
e Key in the desired CD number.
- The music stops and a moment later the selected CD begins
to play.
You can also select the number by using the DISC button on
the remote control.
Err lights up if you select a non-existent number.
SEARCHING FOR A PASSAGE DURING PLAY
(del SEARCH >>»)
e Hold ga down to search backwards to the beginning.
e Hold > down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
— the first 2 seconds fairly slowly, with sound;
— then at the maximum speed, with no sound.
If you reach the end of the last track and release >, play will
resume a few seconds before the end of the CD.
STARTING WITH A PARTICULAR CD (DISC SELECT)
e Key in the required CD number.
— If the CD compartment was open, it will now close.
- Play starts from the selected CD.
You can also select the number by using the DISC button on
the remote control.
Err lights up if you select a non-existent number.
STARTING WITH A PARTICULAR TRACK (0-9)
e First select the number of the required CD using DISC
SELECT or DISC (on the remote control).
e Then key in the required track number (numbers consisting
of two figures must be keyed in within 2 seconds).
— If the CD compartment was open, it will now close.
~ Play starts from the selected track.
You can also select the (track) number by using TRACK PI or
Le TRACK and then pressing PLAY/REPLAY.
Err lights up if you select a non-existent (track) number; play
then starts with the first track on the selected CD.
SCANNING CD'S (SCAN)
e Press SCAN before or during play.
— If the CD compartment was open, it will now close.
— SCAN lights up and the first 10 seconds of each track are
played in turn,
— 10 seconds are counted down each time under REM(aining)
TRACK TIME.
— SCAN lights up before each new track.
e When the player reaches a track which you wish to hear in
full, press SCAN again or PLAY/REPLAY.
OPERATION
PLAYING IN RANDOM ORDER (SHUFFLE) ]
All CDs:
e Press SHUFFLE before or during play.
— lí the CD compartment was open, it will now close.
— SHUFFLE lights up and all the tracks are now played in a
random order.
e lí, during play, you press k@ TRACK, the current track will be
started again; if you press TRACK BH, you will select any one
of the following tracks.
e Press SHUFFLE again if you wish to return to normal play.
English
|
NOTE!
lf, during play, you open the CD compartment to change
CDs (see 'PLAYBACK' on page 6) then (after closing the CD
compartment) playback in random order will continue per
CD: firstall tracks of the current CD, then all tracks of the
next CD and so on.
One CD:
e Select the number of the required CD using DISC SELECT or
DISC (on the remote control).
e Press SHUFFLE, within the time the CD number is flashing
on the display.
— DISC and SHUFFLE light up; the tracks of the selected CD
will now be played in a random order.
e lf, during play, you press k@ TRACK, the current track will be
started again; if you press TRACK PI, you will select any one
of the following tracks.
If you press REPEAT, the tracks will be repeated in a different
order each time, although the first track will always be the
- Same.
— When all tracks of the selected CD have been played, the
next CD in the CD compartment will automatically be
selected.
e Press SHUFFLE again if you wish to return to normal play.
REPEATING A CD (REPEAT)
e Press REPEAT during playback of the CD.
— REPEAT DISC lights up; the CD will now be repeated
continuously.
e Press REPEAT twice to stop the track being repeated.
REPEATING ALL CDs (REPEAT)
e Press REPEAT twice before or during playback.
— REPEAT lights up; all CDs will now be repeated continuously.
e Press REPEAT again to stop the CDs being repeated.
CALLING UP OTHER TIME INFORMATION (TIME)
e Press TIME whenever you want to know the remaining
playing time of the track being played (REM TRACK TIME).
e Press TIME again if you wish to know the remaining playing
time of the entire CD (TOTAL REM TIME).
e Press TIME again if you wish to return to the elapsed playing
time indication of the current track (TRACK TIME).
we ee ee