Shipping Instructions; Specifications; Warranty - Heathkit SG-8 Assembly And Operation Manual

question as this will void the guarantee. U tubes are to be returned, pack them carefully to
prevent breakage in shipment as broken tubes are not eligible for replacement. This replace¬
ment policy does not cover the free replacement of parts that may have been broken or damaged
through carelessness on the part of the kit builder.
SERVICE
In event continued operational difficulties of the completed instrument are experienced, the fa¬
cilities of the Heath Company Service Department are at your disposal. Your instrument may
be returned for inspection and repair fora service charge of $3.00 plus the cost of any additional
material that may be required. THIS SERVICE POLICE APPLIES ONLY TO COMPLETED
INSTRUMENTS CONSTRUCTED IN ACCORDANCE WITH THE INSTRUCTIONS AS STATED
IN THE MANUAL. Instruments that are notentirely completedor instruments that are modified
in design wi'l not be accepted for repair. Instruments showing evidence of acid core solder or
paste fluxes will be returned not repaired.
The Heath Company is willing to offer its full cooperation to assist you in obtaining the specified
performance level in your instrument. Factory repair service is available for a period of one
year from the date of purchase or you may contact the Engineering Consultation Department by
mail. For information regarding possible modification of existing kits, it is suggested that you
refer to any one or more of the many publications that are available on all phases of electronics.
They can be obtained at or through your local library, as well as at ary electronic outlet store.
Although the Heath Company sincerely welcomes all comments and suggestions, it would be im¬
possible to design, test, evaluate and assume responsibility for proposed circuit changes for
specific purposes. Therefore, such modifications must be made at the discretion of the kit buil¬
der according to information which will be much more readily available from some local source.
SHIPPING INSTRUCTIONS
Before returning a unit for service, be sure that all parts are securely mounted
INSTRUMENT
AND
NG~1
ED. |
Pack in a rugged container, preferably wood, using at least three inches of shredded newspaper
or excelsior on all sides. DO NOT SHIP IN THE ORIGINAL KIT CARTON AS THIS CARTON IS
NOT CONSIDERED ADEQUATE FOR SAFE SHIPMENT OF THE COMPLETED INSTRUMENT.
Ship by prepaid express if possible. Return shipment will be made by express collect. Note that
a carrier cannot be held liable for damage in transit if packing, in HIS OPINION, is insufficient.
SPECIFICATIONS
All prices are subject to change without notice. The Heath Company reserves the right to dis¬
continue instruments and to change specifications at any time without incurring any obligation
to incorporate new features in instruments pieviously sold.
WARRANTY
Heath Company warrants that for a period of tl ee months from the date of shipment, all Heath kit
parts shall be free of defects in materials and workmanship under normal use and service and
that in fulfillment of any breach of such warranty, Heath Company shall replace such defective
parts upon the return of the same to its factory. The foregoing warranty shall apply only to the
original buyer, and is and shall be in lieu of all other warranties, whether express or implied
and of all other obligations or liabilities on the part of H ath Company and in no event shall
Heath Company be liable for any anticipated profits, c >nseq ential damages, loss of time orotner
losses incurred by the buyer in connection with thepurchas *, assembly or operation of Heathkits
or components thereof. No replacemer shall be made
oj
parts damaged by the buyer in .he
course of handling or assembling Heath! t equipment.
NOTE: The foregoing warranty is comp ;tely void and we will not replace, repair or sen ce
instruments or parts thereof in which ai 1 core solder or paste fluxes have been used.
HEATH COMPANY