Table of Contents
Advertisement
Problem
Brown streaks
come out of
the holes in
the soleplate
and stain the
laundry.
The soleplate is
dirty or brown
and may soil
clothes.
The soleplate
is scratched or
damaged.
The red
"WATER" light
is on*.
The "anti-calc"
light flashes*.
Possible Causes
You are using
chemical descaling
products or additives
in the ironing water.
Over use of the
steam button.
You are ironing at too
high a temperature.
You have positioned
your iron flat on a
metallic iron support
or ironed over zips or
metal fasteners.
The water tank is
empty.
You have not pressed
the "OK" restart
button.
28
Solutions
Never add any products
to the water tank (see
section on "What water
to use?" ).
Do not hold down the
steam button for too
long, particularly whilst
the pump is pumping
more water into the
boiler tank.
Clean the soleplate as
indicated in the user
manual Use a lower
temperature.
Always stand the iron
upright or on the iron
rest.
Fill the water tank.
Press the "OK" restart
button on the control
panel until the light
goes out.
Advertisement
Table of Contents
