Kenwood TH-75A Instruction Manual page 2

CONTENTS
1. BEFORE OPERATION
2. SPECIFICATIONS and ACCESSORIES ..
3. BATTERY PACK
4. OPERATION
OPERATING CONTROLS ...
RECEIVER OPERATION
Reception, Frequency selection,
Frequency step selection, Programable VFO, A.B.C.
TRANSMITTER OPERATION . F015:
MEMORY 216
-oO PWNH
Microprocessor initialization, Memory channel,
Memory contents, Memory entry,
Memory recall, Memory shift
SCAN
Scan operations, Hold/resu g!
Band scan, Programmable band scan,
Memory channel scan, Double memory scan,
Memory channel lockout, Priority alert
REPEATER OPERATION..
Transmitter offset, Reve
Tone and CTCSS operation, ea
TONE ALERT SYSTEM.
BATTERY SAVER.........
AUTOMATIC POWER OFF.
FAST SQUELCH
5. BLOCK DIAGRAM and
SCHEMATIC DIAGRAM ............. another sheet
6. MAINTENANCE ......o..... ee eeeeceeceseeeseeeteeeseeenaee 29
In Case of Difficulty
7. OPTIONAL ACCESSORIES....................::::cccee 31
CTCSS unit TSU-6
1. BEFORE OPERATION
Thank you for purchasing this new transceiver.
IMPORTANT:
Please read this instruction manual carefully before placing
your transceiver in service.
CAUTION:
Use of an external antenna for fixed station is recommended.
SAVE THIS INSTRUCTION MANUAL.
This Instruction Manual covers the following models.
TH-75A : 144/440 MHz
FM
DUAL BANDER
with
CTCSS unit.
(U.S.A. and Canadian version)
TH-75A : 144/430 MHz FM DUAL BANDER.
(Other market)
TH-75E : 144/430 MHz FM DUAL BANDER.
(U.K. and European version)
The following explicit definitions apply in this manual:
NOTE : If disregarded, inconvenience only, no risk of
equipment damage or personal injury.