Advertisement
Quick Links
INSTRUCTION MANUAL
©PRINTED IN JAPAN B50-6116-00(K, P, U, M, UE, AXT)
87/654321
86/1211109876543
For your records
Record the serial number, found on the back of the unit, in the
spaces designated on the warranty card, and in the space
provided
below.
Refer to the model
and
serial numbers
whenever you call upon your dealer for information or service
on this product.
Model
Serial Number.
Unpacking
Unpack the unit carefully and make sure that all accessories
are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage.
If
your unit is damaged or fails to operate, notify your dealer im-
mediately. If your unit was shipped to you directly, notify the
shipping company
without delay. Only the consignee (the
person or company receiving the unit) can file a claim against
the carrier for shipping damage.
We recommend that you retain the original carton and pack-
ing materials for use should you transport or ship the unit in
the future.
Before applying power
Important!
U.S.A., and Canada
These units are not equipped with an AC voltage selec-
tor switch and the discussion of such a switch that
follows should be disregarded.
All other countries
Units shipped
to countries
other
than
U.S.A.
and
Canada
are equipped
with
an AC
voltage
selector
switch
on
the
rear
panel.
Refer
to the
following
paragraph for the proper setting of this switch.
a
Rear panel safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
AC voltage selection
This unit operates on 120 volts or 220 — 240 volts AC. The
AC voltage selector switch on the rear panel is set to the
voltage that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC outlet, make
sure that the setting position of this switch matches your line
voltage. If not, it must be set to your voltage in accordance
with the following direction.
Note:
Our warranty
does
not cover
damage
caused
by excessive
line
voltage due to improper setting of the AC voltage selector switch.
1-2
220 - 240 V~ setting
1-1
Fig. 1
1. Before plugging in this unit, make sure that the posi-
tion of the AC voltage selector conforms to your line
(mains) voltage. If not, it must be reset.
See Fig.
2. To reset the selector, slide the stopper plate to the
opposite side with a screwdriver
or other pointed
tool. See Fig. 1-2.
3. Insert the power cord securely. See Fig. 1-3.
WARNING:
TO
PREVENT
FIRE
OR
ELECTRIC
SHOCK,
DO NOT EXPOSE THIS AP-
PLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER-
persons.
—_—
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated ''dangerous voitage'' within the product's
enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to
The exclamation point within an equilateral triangle is intended to alert the user to the
presence
of important
operating
and
maintenance
(servicing)
instructions
in the
literature accompanying the appliance.
Advertisement
