Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Massimo Y480032711
Summary of Contents for Massimo Y480032711
- Page 1 MODEL:Y480032711/16711 PORTABLE EV CHARGER USER MANUAL...
-
Page 3: Table Of Contents
MCS Y480032711/16711 CONTENTS Topic Page Important Safety Instructions Important Safety Instructions Portable EV Charger Components Power Outlet Adapter Specification Charging Rate Reference Information of Display Screen and LED Ring Indicator Operation Fault Technical Parameter FCC Rules This instruction manual shall not be reproduced without authorization... -
Page 4: Important Safety Instructions
1 .Important Safety Instructions Save These Instructions Read this entire document before using the Charger. Failure to do so or to follow any of the instructions or warnings in this document can result in fire, electrical shock, serious injury or death. Cautions: 1.Risk of electrical shock or burn. -
Page 5: Portable Ev Charger Components
15.Ensure that the Charger’s charging cable does not obstruct pedestrians or other vehicles or objects. 2.Portable EV Charger Components 3. Power Outlet Adapter... -
Page 6: Specification
4. Specification Use only a 120-volt or 240-volt AC supply, 50/60 hertz wall outlet that has a dedicated and properly grounded circuit, and is rated for at least 12A. If possible, use a dedicated receptacle with a single socket. If the receptacle has two sockets, do not plug any other items into the other socket. -
Page 7: Led Ring Indicator
The LED Ring Indicator Information LED Ring Indicator State The charger is not connected to the power Black supply Yellow Light 1s Power system initialization Flash Blue Light On The vehicle is not connected Vehicle already connected, waiting to be Yellow Light On charged Blue Flashes... -
Page 8: Fault
7.3 End Charging The vehicle ends charging automatically, and the LED status indicator remains green. The user unplugs the vehicle connection, and the LED status indicator remains blue. With the vehicle unlocked, disconnect the Type 1 charger plug from the vehicle inlet, and disconnect the power plug from the outlet. - Page 9 8.2 Possible Causes of Fault LCD Display Status Fault Shown Overcurrent protection. Charge again after 10-min interval. If overcurrent fault occurs Overcurrent three times, end charging and contact customer support. Overvoltage protection. Resume charging after Overvoltage the voltage is normalized. Under-voltage protection.
-
Page 10: Technical Parameter
9. Technical Parameter Description Project Parameter 120VAC/240VAC, Single-phase, Voltage 60Hz 12A/16A/32A (available by Maximum current button setting socket No.) Power incoming 14-50P/5-15P plug Standby active Electrical power consumption Parameters Internal residual CCID20 current detection Overvoltage, under-voltage, overcurrent, short circuit, Electrical protection grounding fault, overheat protection, surge protection 2.4-inch color dot matrix screen... -
Page 11: Fcc Rules
10. FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 12 http://www.massimoelectric.com...
Need help?
Do you have a question about the Y480032711 and is the answer not in the manual?
Questions and answers