Xiaomi Smart Blender User Manual page 4

Precautions for using power supply
Do not use any power supply other than 220–240 V AC
to avoid fire and electrical shocks.
Always unplug the blender by holding the power plug
to avoid fire or electrical shocks.
Do not plug or unplug the power cord when your hands
are wet to avoid injury and electrical shocks.
Use only power sockets with a rated current of 10 A at
minimum.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or the a er-sale service
team to avoid safety hazards.
Do not use other power cord extenders or parts not
approved by Xiaomi when repairing.
To avoid the risk of fire, do not use the low-quality power
strip with this product.
Only use the blender on the base provided.
Always unplug the blender before cleaning, assembling
or disassembling, or a er using.
Make sure that the blender is powered off before
moving the base.
While in use
Do not add water past the maximum level, or else the
water will overflow or spray out and cause burns or
other accidents.
Idling or overloading is strictly prohibited.
Do not move the blender or touch any running parts
when in use to avoid accidents.
Do not heat without any food or water inside.
03