8A-16A-32A
Safety screw
In the event the safety screw breaks, the Traction Apparatus will be prevented from lifting
and the following steps should then be taken:
Guarantee the safety of the load.
Unhook the Apparatus.
When you are sure there is no risk involved in the operation, replace the broken
safety screw with an identical original.
The cause of the overloading needs to be ascertained before using the Traction
Apparatus again. The appropriate pulleys or a traction device with a greater
capacity can be used for this purpose.
WARNING:
In the event the safety screw breaks, never replace it with one other
than the type supplied. The use of any other type of safety screw
implies "unknown" behaviour in relation to overloading, with all the
consequences this might involve. Contact your retailer or manufacturer
for spare parts.
(+34) 944 71 16 00
8A-16A-32A Rev.00-EN
SEGURIDAD
Fig. 4-1 – Safety screw
export@alba.es
(+34) 944 53 17 54
pág. 18 de 28
www.alba.es