Table of Contents
Advertisement
Quick Links
Manufacturer:
Viavi
Product Name:
Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp
Manufacturer Part Number:
FCLP-ACC-KIT1
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp
CleanBlastPRO™
Benchtop Fiber End Face Cleaning System
User Guide
22147176 Rev. 105, Standard
November 2020
Contact the professionals at Fiber Optic Center for a quote or to get more details.
focenter.com
USER GUIDE
• 508-992-6464 | (800) 473-4237 •
23 Centre Street • New Bedford, MA 02740 USA
sales@focenter.com
Product data subject to change
without notice.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Viavi CleanBlastPRO FCLP-ACC-KIT1
Summary of Contents for Viavi CleanBlastPRO FCLP-ACC-KIT1
- Page 1 Product Name: Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Manufacturer Part Number: FCLP-ACC-KIT1 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp CleanBlastPRO™ Benchtop Fiber End Face Cleaning System User Guide 22147176 Rev.
- Page 2 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp EU REACH Article 33 of EU REACH regulation (EC) No 1907/2006 requires article suppliers to provide information if a listed Substances of Very High Concern (SVHC) is present in an article above a certain threshold. For...
-
Page 3: Table Of Contents
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Contents CleanBlastPRO™ Benchtop Fiber End Face Cleaning System............1-1 Key features............................1-2 Ordering information.......................... 1-3 FCLT Series cleaning tips ........................1-4 Safety ..............................1-4 Technical Assistance Center and Knowledge Base ................ - Page 4 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Draining the solvent ........................... 4-7 Preparing the CleanBlastPRO for transportation/shipping ..............4-9 Accessing system settings and information..................4-10 Updating the CleanBlastPRO firmware..................... 4-11 Generating the firmware file......................
- Page 5 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp About this guide This guide provides information about the CleanBlastPRO™ Benchtop Fiber End Face Cleaning System. Revision history Revision Date Details November 2020 • Updated front matter content: •...
-
Page 6: Cleanblastpro™ Benchtop Fiber End Face Cleaning System
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp 1 CleanBlastPRO™ Benchtop Fiber End Face Cleaning System The CleanBlastPRO Benchtop Fiber End Face Cleaning System is an automated, easy-to-deploy fiber connector cleaning system that features an internal solvent tank, air filtration system, cleaning handset with 2-meter (6.5 foot) umbilical, and an LCD screen. -
Page 7: Key Features
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp CleanBlastPRO™ Benchtop Fiber End Face Cleaning System Key features Key features • Supports use of the following cleaning solutions: ▪ 3M™ Novec™ 72DA, a superior, nonflammable, highly cost effective cleaning solvent for fiber end faces ▪... -
Page 8: Ordering Information
1. CleanBlastPRO is rated for use with 3M Novec 72DA Engineered Fluid. Use only Novec 72DA solvent from 3M or CleanBlast solvent from MicroCare Corporation (identical formulation to Novec 72DA). Warranty will be void if a VIAVI repair center or representative determines that any other solvent has been used and is the cause of operational problems. -
Page 9: Fclt Series Cleaning Tips
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp CleanBlastPRO™ Benchtop Fiber End Face Cleaning System FCLT Series cleaning tips FCLT Series cleaning tips The CleanBlastPRO supports a wide range of FCLT Series cleaning tips to suit any application. -
Page 10: Getting Started
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp 2 Getting started This section covers the following information: • “CleanBlastPRO features” on page 2-2 • “Work station requirements” on page 2-6 •... -
Page 11: Cleanblastpro Features
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started CleanBlastPRO features CleanBlastPRO features Figure 2-1: CleanBlastPRO - front Figure 2-2: CleanBlastPRO - rear 2 - 2 CleanBlastPRO™ User Guide, 22147176 Rev. 105 Contact the professionals at Fiber Optic Center for a quote or to get more details. - Page 12 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started CleanBlastPRO features Figure 2-3: CleanBlastPRO - underside Feature See... Dial and Indicators “Indicators and menu navigation” on page 2-4 Refill Port Cover “Filling the solvent tank”...
-
Page 13: Indicators And Menu Navigation
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started CleanBlastPRO features Indicators and menu navigation Figure 2-4: Indicators and CleanBlastPRO menu navigation LCD Screen Displays the CleanBlastPRO menu, operation and status information, and error messages related to maintenance issues. -
Page 14: Handset Features And Mounting
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started CleanBlastPRO features Handset features and mounting In addition to the cleaning tip base and configurable buttons for operation, the handset features an onboard flashlight and a standard 1/4-20 tripod mount. -
Page 15: Mounting The Cleanblastpro On A Cart Or Dolly
Mounting the CleanBlastPRO on a cart or dolly The underside of the CleanBlastPRO features six threaded (M4X0.7-6H) mounting holes for securing the device to a cart or dolly if required. VIAVI recommends using a cart or dolly similar to the SafTcart™ MC-61H Running Gear/Boxcart. -
Page 16: Powering The Cleanblastpro
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Powering the CleanBlastPRO Powering the CleanBlastPRO CAUTION Use only the power adapter shipped with the CleanBlastPRO to power the device. Powering on... -
Page 17: Connecting Or Disconnecting An Air Source
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Connecting or disconnecting an air source Connecting or disconnecting an air source Use any of the following air sources with the CleanBlastPRO: •... -
Page 18: Filling The Solvent Tank
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Filling the solvent tank The CleanBlastPRO supports both manual and automatic refilling of its internal solvent tank, and provides a contaminant-free connection between the solvent bottle and the tank to prevent contamination of the solvent tank during refill. - Page 19 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Step 3 At the front of the CleanBlastPRO, rotate the refill port cover counterclockwise. Depressurization of the CleanBlastPRO begins immediately. Observe the message and count- down timer that appear on the LCD screen and wait for depressurization to complete.
- Page 20 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Step 6 Invert the bottle of solvent upside down and hold it above the refill port so that the solvent drains into the tank.
-
Page 21: Performing An Auto Refill
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Performing an auto refill WARNING Read this procedure in full before you begin. Do not attempt to connect the refill kit to the CleanBlastPRO until the device has completely depressurized. - Page 22 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Depressurization of the CleanBlastPRO begins immediately. Observe the message and count- down timer that appear on the LCD screen and wait for depressurization to complete.
- Page 23 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Filling the solvent tank Press and hold the dial until the message One moment appears on the LCD screen, and then Step 7 release the dial.
-
Page 24: Configuring Custom Cleaning Profiles
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Configuring custom cleaning profiles Step 10 Click the dial to return to the previous menu, and then disconnect the fill connector from the handset nozzle. - Page 25 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Configuring custom cleaning profiles Step 2 On the Select Profile menu, scroll to a custom profile option (CUSTOM1 to CUSTOM5), and then press and hold the dial to access the Edit: CUSTOM menu for the profile.
-
Page 26: Handset Operation
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Handset operation Handset operation Before you begin cleaning fiber end faces, review the handset configuration settings and, if required, modify any setting. -
Page 27: Foot Pedal Operation
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Getting started Foot pedal operation Foot pedal operation CleanBlastPRO provides an input for operation via an optional foot pedal. Note: Foot pedal type must be ¼” (6.35 mm) Normally Open (NO); for example, Foot Pedal FCLP-FP-01 (see “Ordering information”... -
Page 28: Fiber Cleaning
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp 3 Fiber cleaning • “Before you begin cleaning” on page 3-2 • “Priming the handset” on page 3-2 • “Performing a cleaning cycle” on page 3-3 CleanBlastPRO™... -
Page 29: Before You Begin Cleaning
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Fiber cleaning Before you begin cleaning Before you begin cleaning Ensure the following... See... The CleanBlastPRO is located on a level, stable “Powering the CleanBlastPRO” on page 2-7 surface and powered on. -
Page 30: Performing A Cleaning Cycle
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Fiber cleaning Performing a cleaning cycle Performing a cleaning cycle The CleanBlastPRO can perform either regular or extended cleaning of fiber end faces. In a regular cleaning cycle, the settings defined in the active cleaning profile (e.g., Simplex, MPO, or CUSTOM) ensure... -
Page 31: Maintenance
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp 4 Maintenance • “Setting up the CleanBlastPRO with a check valve and pressure tank” on page 4-2 • “Replacing air filters” on page 4-3 •... -
Page 32: Setting Up The Cleanblastpro With A Check Valve And Pressure Tank
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Setting up the CleanBlastPRO with a check valve and pressure tank Setting up the CleanBlastPRO with a check valve and pressure tank... -
Page 33: Replacing Air Filters
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Replacing air filters Replacing air filters The CleanBlastPRO features replaceable air filters to ensure that contaminants do not enter the system during either use of the device or refilling of the solvent take: •... - Page 34 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Replacing air filters Step 1 Position the CleanBlastPRO so that the overhang at the rear of the device extends past the edge of the work surface and all four pads on the bottom of the device are fully on the work surface.
-
Page 35: Replacing The Air Filter On The Cleanblastpro Auto Refill Kit
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Replacing air filters Replacing the air filter on the CleanBlastPRO Auto Refill Kit Step 1 Ensure that you have the correct replacement air filter (FCLP-FA-F1) on hand. -
Page 36: Auto-Drain Valves
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Auto-drain valves Auto-drain valves Compressed air causes moisture in the air to precipitate out into water. It is very common in high humidity environments for a large amount of water to accumulate inside the air filter canisters. -
Page 37: Draining The Solvent
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Draining the solvent Draining the solvent CAUTION Never reuse solvent drained from the CleanBlastPRO. Reusing drained solvent can introduce dust and other contaminants from the air into the CleanBlastPRO. Ensure that drained solvent is immediately discarded in accordance with regional regulations for the safe disposal of such fluids. - Page 38 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Draining the solvent Step 6 Press and hold the dial until the fluid begins to drain from the handset into the container, and then release the dial.
-
Page 39: Preparing The Cleanblastpro For Transportation/Shipping
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Preparing the CleanBlastPRO for transportation/shipping Preparing the CleanBlastPRO for transportation/shipping Whenever possible, transport/ship the CleanBlastPRO in its original packaging. Always ensure that the device is securely wrapped and fitted inside the container to prevent damage to any part of the device. -
Page 40: Accessing System Settings And Information
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Accessing system settings and information Accessing system settings and information “System Settings” on page A-5 for information about options available on the System Settings menu. -
Page 41: Updating The Cleanblastpro Firmware
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Updating the CleanBlastPRO firmware Updating the CleanBlastPRO firmware Use the CleanBlastPRO™ Firmware USB Flash Drive Creator to generate and save the firmware file to a USB-C flash drive. -
Page 42: Updating The Firmware
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Updating the CleanBlastPRO firmware Updating the firmware Step 1 Connect the flash drive where the firmware file is saved to the USB-C port at the rear of the... -
Page 43: Exporting The Log File
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Maintenance Exporting the log file Exporting the log file To assist with troubleshooting, VIAVI Customer Support might request that you export the CleanBlastPRO log file to a USB-C flash drive and then share the file with them. - Page 44 Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix A CleanBlastPRO menu summary This section covers the following information: • “Menu icons” on page A-2 • “VIAVI Menu” on page A-2 •...
-
Page 45: Appendix A Cleanblastpro Menu Summary
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix A CleanBlastPRO menu summary Menu icons Icon Action > Scroll/Select Continue Back VIAVI Menu Option Profile Active cleaning profile... -
Page 46: Main Menu
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix A CleanBlastPRO menu summary Main Menu Option Profiles “Select Profile and Edit:CUSTOM” on page A-3. Fluid/Tank “Fluid/Tank Menu” on page A-4. Current Warnings “Current Warnings”... -
Page 47: Fluid/Tank Menu
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix A CleanBlastPRO menu summary Fluid/Tank Menu Option Fill Perform Manual fill or Auto Fill operations. See “Filling the solvent tank” on page 2-9. -
Page 48: System Settings
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix A CleanBlastPRO menu summary System Settings Option Display Settings Configure settings for the following display parameters: • LCD Backlight • LCD Sleep Timer •... -
Page 49: Appendix B Specifications
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix B Specifications Table B-1: CleanBlastPRO Benchtop Fiber End Face Cleaning System specifications Parameter Specification Air/Gas Source Clean, dry air or nitrogen (N... -
Page 50: Appendix C Custom Profile Examples
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix C Custom profile examples This section covers the following information: • “Example 1 - Basic Clean” on page C-2 • “Example 2: Basic Clean - Two Cycles” on page C-3 •... -
Page 51: Example 1 - Basic Clean
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix C Custom profile examples Example 1 - Basic Clean Profile description • Start fluid, air, and vacuum time = 0 • Fluid on for 200 msec (0.2 sec) •... -
Page 52: Example 2: Basic Clean - Two Cycles
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix C Custom profile examples Example 2: Basic Clean - Two Cycles Profile description • Apply two cycles of the Basic Clean profile with one button press Note: A 400 msec (approximately) dwell time with all valves off is automatically added between cycles. -
Page 53: Example 3: Blow/Vac Then Clean
Click here for more details on the Viavi CleanBlastPRO Accessory Kit Foot Pedal Extension Cable and Clamp Appendix C Custom profile examples Example 3: Blow/Vac Then Clean Profile description • First blow air, then vacuum, then clean, then dry. •...
Need help?
Do you have a question about the CleanBlastPRO FCLP-ACC-KIT1 and is the answer not in the manual?
Questions and answers