Table of Contents
Advertisement
I ce and water dispenser
;
Y ou can use the ice and water dispenser to dispense:
I c e a n d w a t e r d i s p e n s e r
▯
cooled water
▯
crushed ice
▯
ice cubes
Before using the appliance for the
first time
m
Warning – Risk of injury!
Never reach into the dispenser opening of the ice cube
container.
Caution!
Do not place bottles or food in the ice cube container.
This can block and so damage the ice maker.
Notes
–
The ice and water dispenser only works when the
appliance is connected to a drinking water pipe.
–
Discard the first 5 glasses of water and the first 30-
40 ice cubes for hygiene reasons
When the appliance has been connected, there may be
air in the water circuit. Keep dispensing water until
there are no more air bubbles in it.
It takes approx. 24 hours until the first batch of ice
cubes is ready.
Observing drinking water quality
All materials used in the ice and water dispenser are
odourless and tasteless.
If the water has an aftertaste, this may be due to the
following causes:
▯
Mineral content and chlorine content of the drinking
water
▯
Material of the water pipe
▯
Freshness of the drinking water
Note: If you dispense water again after a long time,
it may taste stale. In this case, discard the first 15
glasses.
You will obtain the best water quality if you dispense a
little water regularly.
The particle filter supplied will only filter particles out of
water, not bacteria or microbes.
Information on operation of the ice
maker
Ice cube production starts as soon as the freezer
compartment has reached the set temperature.
Once ready, the ice cubes are automatically discharged
into the ice cube container.
Ice cube production stops as soon as the ice cube
container is full.
Note: You can accelerate ice production by setting a
colder freezer compartment temperature. This will
slightly increase energy consumption.
Dispensing ice and water
Notes
–
To prevent the ice from falling on the floor, hold the
glass directly under the dispenser when dispensing
crushed ice.
–
To prevent water damage, the water dispenser
automatically stops after 30 seconds of continuous
dispensing. If you want to dispense more water,
wait 5 seconds and then press the button again.
–
The dispensed water is cooled to a palatable
temperature. To obtain a colder drinking
temperature, add ice cubes to the glass.
–
The water may become warmer when dispensing
large amounts of water.
1
Hold the glass under the ice and water dispenser.
2
Keep pressing the dispensing button until the
required quantity of ice or water is in the glass.
Defrosting
=
F reezer compartment
D e f r o s t i n g
The fully automatic NoFrost system ensures that
the freezer compartment remains free of ice. Defrosting
is no longer required.
Ice and water dispenser
en
25
Advertisement
Table of Contents
