Download Print this page

Aiphone MJ-1AD Installation & Operation Manual page 5

Door sentry video entry security intercom

Advertisement

■ Wide-angle viewing
MJ-DS wide-angle lens sees image of entry 70cm H x 100cm W (2'3" H x 3'3" W)
at 50cm, 20" from camera. The camera has automatic backlight compensation.
■ Receiving a call from MJ-DS
1
.
2
.
3.
4.
A 4-tone chime is heard and the monitor turns
45 seconds if not answered).
Pick up MJ-1AD handset and communicate.
Replace handset on cradle.
3
on (it will turn
1
4
w P-
off in approx.
2
■ Calling MJ-DS
1. Pick up MJ-1 AD handset.
2. Monitor will turn on.
Two-way communication is established.
■ Visual monitoring
1. Press MONITOR button on MJ-1 AD.
2. Both monitor and receive audio are turned on.
3. Press MONITOR button to turn off.
Otherwise it will time out in approx. 2-1/2 minutes.
■ Monitor timer
1. When called, an image is held for 45 seconds. The image is kept on
for 2-1/2 minutes after picking up.
2. Also, monitor is turned on or off with each pressing of the MONITOR button.
■ Key-marked button
1. Key-marked button provides dry closure contact for door strike.
2. Depress and hold down to activate EL-9S door strike.
■ Receiving a call at 2nd MJ-1 AD
1. Call-in from MJ-DS rings MJ-1 AD #2 with 4-tone chime and an image.
2. Pick up on MJ-1 AD #2, which shuts off image on MJ-1 AD #1.
■ No room calling feature
1. MJ-1 AD #1 and #2 cannot call each other.
2. While one MJ-1 AD is picking up, the other
MJ-1 AD cannot join.
■ Adjustments
TONE, 3-level for controlling chime call tone
and receiver volume in handsfree monitoring.
BRIGHT, 3-level for controlling screen
brightness (and contrast).
-
5
-

Advertisement

loading

This manual is also suitable for:

Mjs-1ad/a