Summary of Contents for BASI SHN200
- Page 1 Solar House Number Stainless Steel SHN 200 IPX5 High quality, featuring lighting Sustainable thanks to solar-powered LEDs Charges during the day - lights up at night MOUNTING/OPERATING INSTRUCTIONS facebook.com/BASI GmbH @basi_gmbh www.basi.eu...
-
Page 2: Cleaning & Maintenance
Cleaning/maintenance General notes It is important to ensure that the solar Intended use field is clean and not soiled. A soiled so- lar field may lead to the battery not get- This solar house number is intended for ting fully charged. This would reduce the the protected outside area (IPX5). -
Page 3: Installation Site
Scope of delivery Installation Check that the delivery is complete: 1. Select the wall position where you want to install the solar house number • 1x SHN 200 Solar House Number and ensure that there are no electrical wires in or on the wall. •... -
Page 4: Troubleshooting
SHN 200 Solar House Number screw 28.5 Troubleshooting The solar house number should be charged for at least 6 hours before the first use. The battery is then fully charged. If the solar house number is not working, check whether one of the following could Then set the switch to “ON”, and the light be the possible cause for the same: gets charged during the day and switch-... - Page 5 Any use outside the narrow limits of children. of copyright law without the consent of BASI GmbH is not allowed and • Rechargeable non-recharge- is liable to prosecution.