Akai S612 Operator's Manual page 6

MIDI OUT Jack - - - - - - - - - - - - - - - - - - -
This jack is for sending MIDI system
~ - - - - - - - - - - - - MIDI IN Jack
exclusive information to other MIDI
equipment.
MIDI THRU J a c k - - - - - - - - - - - - - - - - - - ,
This jack provides a direct copy of
data coming in the MIDI IN jack.
LINE OUT Jack _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __,
The monitor/ output signal of the
S612 appears at this LINE OUT jack,
which can be connected to the line
input of mixers or amplifiers.
• Connect a standard 6.3 mm¢
phone plug to this jack.
Note: This jack is connected in paral-
lel with the LINE OUT jack on
the front panel.
D C O U T J a c k - - - - - - - - - - - - - - - - - - - - - - - -
This jack provides a DC power
supply [8 V] for the MD280 .
This jack is for receiving MIDI infor-
mation from other MIDI equipment.
- - - - - - - - - VOICE OUT Jack
The six voices of the S612 can be in-
dividually accessed through this jack.
" - - MD280 connector (MD280 ONLY)
This connector is specially designed
for connection of the Sampler Disk
Drive
M
D280, and is used for save/
load operation onto sampler disks.