DOGNESS SMART CAM TREATER Faqs

 SMART CAM TREATER FAQs
o Download the Dogness app on your phone
How to CONNECT a Treater to a Smartphone:
o Create a login and password
o Make sure your treater is plugged in
o Open your Dogness app, login, select the plus (+) sign (top
right hand corner)
o Select Smart Cam Treater
o The green wifi light needs to be flashing green on the
Treater. If not, press and hold the "set" button on the
treater (below the camera, from the front) wait for a beep
sound and the light will begin to flash..
o Then press "Next" on your Dogness app.
o Enter your WiFi information. (2.4 ONLY. DOES NOT
o Hold the QR code up to camera on treater, about 5 inches
SUPPORT 5.0 GHZ!!)
away. Wait until you hear a different beep sound.
o If you do not hear a beep sound, adjust the height
positioning of your phone in front of the camera.
o Then, wait to connect. DO NOT EXIT APP WHILE
o Enjoy your Dogness smart pet product.
CONNECTING.
o Make sure you have the latest version of the app
 If the treater is not connecting, what do I do?
downloaded. Then, check and see if your WiFi is operating
on 2.4 GHz or 5.0 GHz. If you do not know, call your internet
providers customer service and they will tell you. Our
devices do not support 5.0. Restart your feeder by holding
down the button on the right side for 8 seconds. The green
light will start flashing. Login to your Dogness app, press the
plus sign, repeat the steps above.
o If that does not work, call us at 1-833-364-6377