LG OLED83C3AUA User Manual page 53

Connecting USB
Connecting USB
Connect a USB storage device (USB HDD, USB stick) to the USB port on the TV to
enjoy the content files stored on the USB storage device on your TV.
Tips for Using a USB Storage Device
A USB storage device that has a built-in automatic recognition program or uses its own
driver might not be recognizable.
Some USB storage devices may not be supported or may not work properly.
If you use a USB extension cable, the USB storage device may not be recognized or may
not work properly.
Please use only USB storage devices formatted with the FAT32, exFAT or NTFS file
system provided by Windows OS.
It is recommended that you use an external USB HDD with a rated voltage of 5V or less
and a rated current of 500 mA or less. If you use a device requiring a higher voltage/current
than the rated voltage/current, it may not operate properly due to lack of current.
It is recommended that you use a USB hub or USB storage device with a power supply.
We recommend using a storage device with a capacity of 32 GB for the USB memory and
2 TB or less for the USB hard disk.
If a USB HDD with power-saving function does not work turn the hard drive off and on again
to make it work properly. For more information about the USB HDD, see the Owner's
manual.
Data on a USB storage device may be damaged. It is recommended that you back up any
important files. Users are responsible for data management. The manufacturer bears no
responsibility.
Press the button on the remote control. To remove the USB storage device, press the
Eject button, which appears at the top when you focus on the USB storage device you
want to remove. If you disconnect the USB storage device without selecting
may occur in your TV or storage device.
When you connect a USB storage device of a file system not supported by the TV to the
USB IN
port, the format message appears. To use the connected USB storage device, you
should format the device first.
Formatting deletes all data stored on the USB storage device, and the device is formatted
with the FAT32, exFAT or NTFS file system.
Run Home Hub
USB from Home Hub
by pressing the
and select the
button on the remote control. Select the connected
Format button to format the USB storage device.
51
Eject , an error