Sony CDP-C435 Service Manual page 31

SONY.
AEP Model
CDP-C435
Subject : Positioning the Encoder When Attaching the
Gear (MAIN)
The position of the rotary encoder must be adjusted
when attaching the gear (MAIN). If its position is not
adjusted properly, problem may occur afterwards
during operation.
: Correction
@ Gear (REV)
€——— Stopper washer
© Gear (MAIN)
Pull the set lever in the arrow direction,
adjust the dowel and attach it.
Gear (U/D)
(The gear must be at "DOWN".)
@ Adjust the rotary encoder as shown here.