Advertisement
-High Platform
Challen in
Side,
7
Ladder. Peg. Bar
Arched Panel
+ Insert the stair:pegs into the middle holes on.the arched
panel and center panel.
Helpful Hint: In the stairs position, the ladder peg bar rests
on.the ground:
* To.secure the platform:
;
— Align the screw holes in the center panel and platform,
You may need to slightly adjust the position of the plat- -=
form to align the holes.
:
i
Helpful Hint: To make sure the screw holes are aligned,
+ Atan angle, insert
the
s l i
i
:
pass the shaft of the screwdriver through the holes
arched pane:
ine ele through the opening of the
before inserting the screws.
:
~ Place a washer on a screw. and insert the screw.
through the center.panel.and into the platform @.
Tighten the. screw. with a Phillips screwdriver. Do not
over-tighten.
~
et
— Repeat this procedure to insert a screw through the
arched panel and into the platform @.
+ To secure the stairs:
— Place a washer on a screw and insert the screw
through the arched panel and into the stairs @-
Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Arched Panel
Advertisement
