Summary of Contents for Emerson EAM-9051
- Page 1 USB STREAMING MICROPHONE KIT EAM-9051 USER MANUAL Please read carefully before use and keep for future reference...
-
Page 2: Specifications
FEATURES 1) Metal Mesh Head 3) Volume Control Dial • Normal – Indicated by Green Light • Muted – Indicated by Red Light. • Press and hold SPECIFICATIONS • Frequency Response: 20 Hz~20 kHz • • Max. SPL: 115dB • •... -
Page 3: Product Accessories
PRODUCT ACCESSORIES 1. Shock Mount 4. Condenser Microphone 2. Arm Stand 5. Pop Filter 3. Microphone Cover 6. USB Cable... -
Page 4: Microphone Installation
MICROPHONE INSTALLATION 1. Mount the clamp of the Arm Stand to a table per Figure 1. Arm Stand per Figure 2. Figure 2 Figure 1 3. Install the Pop Filter per Figure 3. 4. Install the Microphone per Figure 4. Figure 3 Figure 4... -
Page 5: Microphone Setup
MICROPHONE SETUP 1. Plug one end of the USB cable into the USB port of the microphone and you can start using the microphone immediately. 2. If you need volume control, turn the knob to the right. POWER SOCKET POWER REQUIREMENTS 1. -
Page 6: Connection Instructions
CONNECTION INSTRUCTIONS 1. Connect the microphone to a computer via a USB cable. The computer will Windows: as the default device. Mac OS: Select a device for sound input table, select USB AUDIO to set it as the default device. back of the microphone. - Page 7 AUDIO LEVEL SETUP volume, please follow the following steps: 1. Check the hardware devices on the computer to see if there are any USB AUDIO devices. 2. Make sure that the computer’s microphone input is set to USB AUDIO microphone input device. headphone device.
-
Page 8: Troubleshooting
SOLUTION 1. When the microphone is connected to a computer for use, check whether the microphone volume of the “EAM-9051” device is too low. If yes, adjust the volume to see whether it goes back to normal. 2. Check whether the volume adjustment knob has set the volume to a very low level. -
Page 9: Safety Instructions
SAFETY INSTRUCTIONS To avoid possible personal injury or property damage caused by electric shock, use, please read and observe the following items before using the product. 1. When using the product, please adjust the volume of the device to a avoid product failure and hearing damage. -
Page 10: Fcc Notice
• Consult the dealer or an experienced radio/TV technician for help. SUPPORT manual. Please also visit us on the web at www.emersonaudio.com to get up assistance, please contact Emerson Technical support. EMERSON Technical Support 2320 East 49th ST Vernon, CA 90058 Tel: (323 ) 583-8883 Email: support@emersonaudio.com...
Need help?
Do you have a question about the EAM-9051 and is the answer not in the manual?
Questions and answers