Summary of Contents for 21Energy S9x
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Bitcoin Heater S9x S9x2/S9x3/S9x4 Instruction Manual Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 2 Quick Start Guide (German) You can find a short instruction for commissioning the Bitcoin Heater S9x in the form of an explanatory video on the website https://21energy.io/bitcoin-heater-s9x-bedienungsanleitung/ If you scan the following QR code with the camera of your mobile phone, you will be taken directly to the explanatory video.
-
Page 3: Table Of Contents
4.4 ..Putting the fan heater into operation ........................ 18 Setting Up, Operating and Using the Heater ..................... 19 5.1 ..Connecting the Bitcoin Heater S9x to the Internet .................... 19 5.2 ..Configuration of the installed Bitmain Antminer S9 ..................23 5.2.1 Identifying the IP addresses of the miners ........................ - Page 4 7.3 ..No warm air comes out of the housing ......................39 7.4 ..The volume has increased significantly compared to the beginning..............39 7.5 ..Burnt smell coming from inside the enclosure ....................39 EU Declaration of Conformity ............................40 Instruction Manual Bitcoin Heater S9x Version 1.0 / 01.2023...
-
Page 5: Important Notes
1 Important Notes 1.1 Notes on the operating instructions Read this instruction manual carefully before operating the Bitcoin Heater S9x. Follow all of the following safety instructions. Keep the operating instructions handy for future reference. 1. Read this instruction manual. -
Page 6: Instructions For Use
The cable must be placed so that it does not obstruct the movement of people. • The circuit to which the appliance is connected must be equipped with an automatic fuse. The distance between the sockets and the appliance must be at least 30 cm. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 7: Other Notes
The guarantee begins with the purchase of the unit. Should it become necessary to make use of the guarantee, please contact 21ENERGY GmbH directly. The following guarantee conditions apply. -
Page 8: Notes On Storage Of The Instructions
1. The customer must present the original invoice when registering warranty claims. 2. It is at the discretion of 21ENERGY GmbH whether the warranty is fulfilled by repair or by replacement of the device or the defective part. Further claims are excluded. Replaced devices or parts of devices become the property of 21ENERGY GmbH. -
Page 9: Description Of The Product
2.1 Purpose of the product 21ENERGY GmbH provides a new type of fan heater on the market, which is essentially operated with the waste heat of information technology devices, in particular with the waste heat of Bitcoin miners. For this purpose, used Bitcoin miners that have already been introduced into the EEA are used, which are mounted in a specially created metal housing. -
Page 10: Modification
Bitcoin miners and their power supply units, which are distributed by 21ENERGY GmbH, are, as mentioned above, used devices. These are cleaned by 21ENERGY GmbH and fitted with new fans. The exchange of the fans is possible according to the operating instructions of the Bitcoin Miner manufacturer. The exchange of the fans on the Bitcoin Miners themselves is done by loosening four screws per fan and disconnecting the connection cable. -
Page 11: Elements Of The Bitcoin Heater
Elements of the Bitcoin Heater Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 12: Product Compliance
EN 60335-2-30:2021-05: Safety of household and similar electrical appliances - Part 2-30: Particular requirements for room heaters (IEC 60335-2-30:2009 + COR1:2014 + A1:2016, modified). The requirements of these two standards have been analysed and mapped to the heaters. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 13: Safety Instructions
• Note: Damage to the unit Operating the unit in a corrosive environment (e.g. sea air) can lead to corrosion of the unit. Do not operate the unit in a corrosive environment. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... - Page 14 If the unit is not set up correctly, it may tip over and injure people. The unit may only be operated on a horizontal, level and sufficiently firm surface. The surface must withstand a load of 30 kg per foot. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 15 If the mains lead of this appliance is damaged, it must be replaced by the manufacturer or its after-sales service or a similarly qualified person in order to avoid hazards. Do not operate the unit if damage to the power cord is evident. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
-
Page 16: Graphic Symbols As Safety Instructions On Packaging And Product
Shows the correct horizontal alignment of the unit. The arrow must point upwards. Attention 3.3 Graphic symbols as safety instructions in the operating instructions Symbol Meaning Caution Danger due to electrical voltage Note Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 17: Preparing The Product For Use
4 Preparing the product for use 4.1 Transport and storage of the product The Bitcoin Heater S9x is delivered in all versions in a well-protected cardboard box on a pallet. The cardboard box is fixed to the pallet with a tightly stretched strapping band. -
Page 18: Putting The Fan Heater Into Operation
(RCD) and is installed at a minimum distance of 30 cm from the fan heater. You will then hear a short and relatively loud rotation of the fans. You can now proceed with setting up the fan heater as described in step 5. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 19: Setting Up, Operating And Using The Heater
5 Setting Up, Operating and Using the Heater 5.1 Connecting the Bitcoin Heater S9x to the Internet After you have connected the Bitcoin Heater to the power, the TP Link brand Wi-Fi repeater will take about 30 seconds to boot up. On a WLAN-capable device of your choice, search for the WLAN network "TP-... - Page 20 "Quick Setup" in the top left menu. If you want to connect the Bitcoin Heater to another Wi-Fi network in the future, please click on "Quick Setup" again. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 21 In the next step, you can assign a name for the extended network (SSID). Normally, you can simply confirm the default settings by clicking on "NEXT". If you wish, you can also assign a different password than for your existing WLAN network. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 22 You can exit the setup guide of the WLAN repeater by selecting the box "I have connected to the extended network" and clicking on "EXIT". Your Bitcoin Heater is now connected to your Wi-Fi network. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
-
Page 23: Configuration Of The Installed Bitmain Antminer S9
The 2 marked on the picture shows the IP address of the respective miner. You will need these two, three or four IP addresses to access the backend of the miners in the next step. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 24: Calling Up The Backend Of The Miners
You will now see the login page of the Antminer S9 with the Braiins OS+ operating system installed. Enter the default user name "root" and leave the password blank. Now click on "Log In". Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 25: Configuration Of The Mining Pool
Since this happens so rarely, the community calls it "lottery mining". We recommend using a mining pool to get consistent bitcoin mining returns. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... - Page 26 Make a note of this username/user name. You will need this when configuring the mining pool in the miner backend. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 27 You can also assign worker names. This allows you to assign mining power to individual miners. You do this by putting a "dot" after your username and entering the worker name. For example: "yourusername.workername". If you give all miners a different worker name, you can distinguish the mining performance accordingly. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
-
Page 28: Changing The Heat Output Of The Bitcoin Heater
Repeat this step for all miners installed in the heater. 5.2.4 Changing the Heat Output of the Bitcoin Heater The 21ENERGY Bitcoin Heaters are delivered with a factory setting of 500 watts per installed Antminer S9. The maximum current consumption is •... - Page 29 (only a few watts for standby operation). Thus, the minimum heating power of all three S9x models is about 380 watts and the maximum heating power is 2000 watts for the S9x2 and 2500 watts for the S9x3 & S9x4.
-
Page 30: Levelling The Fans And Optimising The Noise Level
Levelling the fans and optimising the noise level The 21ENERGY Heater has a high mass with its Antminer S9 and its massive housing. Shortly after the heater is switched on, all components are still cold and warm up with operation. The fans of the Antminer S9 are factory-set to cool the installed chips on the hashboards to 85°C. - Page 31 For this reason, it should be cleaned regularly (the interval depends on the dust load of the environment in which the heater is operated). Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 32 Click on "Understood" if you are aware of the risk and know what fan speed to set to cool the miner sufficiently. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
- Page 33 This is the maximum temperature that the Bitcoin Heater is currently allowed to reach. Example: You set up the 21ENERGY Bitcoin Heater S9x at your home and put the heater into operation at 19°C. The maximum temperature to be expected at your home is 25°C, for example. This means that it is currently 6°C colder than the maximum expected ambient temperature.
-
Page 34: Mining Performance
Bitcoin directly to an exchange of your choice. If you use the mining pool Braiins recommended by us, log in to your account at https://pool.braiins.com/login. Alternatively, you can scan this QR code: Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... - Page 35 Since the Braiins Pool charges a small transaction fee for small payouts, we recommend paying out the Bitcoin in partial amounts that are not too small in order to save unnecessary fees. From 0.01 BTC there is no transaction fee. Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...
-
Page 36: Mining Reward Frequency
3-5%. At 5%, this means that the Braiins pool statistically finds every 20th block - so on average every 200 minutes. Thus, on average, every 200 minutes one is rewarded for operating the 21ENERGY Bitcoin Heater with the use of the Braiins Pool. -
Page 37: Maintenance, Cleaning And Disposal
It is strongly recommended that the unit be maintained on a regular basis using the following points in order to operate the unit as efficiently and for as long as possible. The unit must not be opened by unauthorised persons. If something does not work, please contact 21ENERGY GmbH. •... -
Page 38: Troubleshooting
If so, one of the many temperature sensors is probably defective. In this case, please set the fans to a static fan speed as described under point 5.2.5 (levelling of the fans and noise level optimisation). Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023... -
Page 39: No Warm Air Comes Out Of The Housing
7.5 Burnt smell coming from inside the enclosure During the development of the 21ENERGY Bitcoin Heater, the highest priority was given to safety and fire protection. The fire load has been reduced to an absolute minimum and the miners have very many temperature sensors that regulate the fans with the factory settings supplied to prevent overheating. -
Page 40: Eu Declaration Of Conformity
• EN 60335-2-30:2021-05: Safety of household and similar electrical appliances-Part 2-30: Particular requirements for room heaters (IEC 60335-2-30:2009 +COR1:2014 + A1:2016, Modified) Signed: 21ENERGY GmbH Ing. Maximilian Obwexer, Management Board Innsbruck, 16.01.2023 Bedienungsanleitung Bitcoin Heater S9x Version 1.0 / 01.2023...