Page 3
CONTENTS English................This Operating Manual complies with these standards: IEC 60079, IEC 82079, ANSI Z535.6 Diese Bedienungsanleitung erfüllt die Anforderungen der folgenden Normen:...
READ AND UNDERSTAND THE INSTRUCTIONS PROTECT YOUR LIFE AND READ THE OPERATING MANUAL This Operating Manual is part of the device IS-TC1A.M1 (model MTC1A01). This Operating Manual provides important information for safe use of the device. Before using the device, read this Operating Manual carefully and pay particular attention to the “Safety”...
DEVICE OVERVIEW HOLDER: Holder for IS530.M1. PLUG: Connecting IS530.M1. MAGNETIC CHARGER PORT: Connection for the i.safe PROTECTOR 3.0 Magnetic Charger Cable (included in the IS530.M1 package) for charging the IS530.M1. THERMAL CAMERA: Recording temperatures. SAFETY Read the “Safety” section of this Operating Manual carefully before using the device. If you do not follow these instructions or do not understand them, this could lead to death, severe injuries and damage to the device.
Page 6
The device may only be used in zones 1, 21, 2, 22, M1 and M2. The device must be protected from impacts with high impact energy, against excessive UV light emission and high electrostatic processes. Only accessories approved by i.safe MOBILE GmbH may be used. USE IN EXPLOSION HAZARDOUS AREAS DANGER Improper use can result in death or severe injuries! Only use the device in explosion hazardous areas of zones 1, 21, 2, 22, M1 and M2 or outside of...
The device can now be used together with the IS530.M1 in explosion hazardous areas. INITIATION NOTE: The following information applies to IS-TC1A.M1 in combination with the IS530.M1. Download and install the Seek Thermal application from the Google Playstore. Open the Seek Thermal application at the IS530.M1 and you can start immediately .
CHARGING THE IS530.M1 You can charge the IS530.M1 via the magnetic charger port on the IS-TC1A.M1. DANGER An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries! Only charge the IS530.M1 outside of explosion hazardous areas. Do not charge the IS530.M1 in the vicinity of flammable substances.
Page 9
This way, you prevent uncontrolled waste disposal and promote the recycling of material resources. You can obtain further information from regional waste disposal companies, state authorities or the i.safe MOBILE service centre responsible for your country or region at www.isafe-mobile.com/en/support/service TRADEMARKS i.safe MOBILE and the i.safe MOBILE logo are registered trademarks of the...
Page 11
CONTACT/SERVICE CENTRE FOR FURTHER QUESTIONS PLEASE CONTACT OUR SERVICE CENTRE: i.safe MOBILE GmbH, i_Park Tauberfranken 10, 97922 Lauda-Koenigshofen, Germany support@isafe-mobile.com https://support.isafe-mobile.com...
2014/34/EU, 2014/30/EU, 2011/65/EU (2015/863/EU) nach Richtlinie 2014/34/EU, 2014/30/EU, 2011/65/EU (2015/863/EU) The company i.safe MOBILE GmbH declares under its sole responsibility that the product to which this declaration relates is in accordance with the provisions of the following data, directives and standards: Die Firma i.safe MOBILE GmbH erklärt in alleiniger Verantwortung, dass Ihr Produkt auf welches...
Page 13
Angewandte harmonisierte Standards IEC 62321-4: 2013 + A1: 2017; IEC 62321-7-1: 2015; IEC 62321-7-2: 2017; IEC 62321-6: 2015; IEC 62321-8: 2017 2004 CE Marking CE-Kennzeichnung Lauda – Koenigshofen 27.10.2022 Dirk Amann Managing Director 1067CC12REV00_cmu All rights reserved, i.safe MOBILE GmbH...
Need help?
Do you have a question about the IS-TC1A.M1 and is the answer not in the manual?
Questions and answers