Manual Speed Selection; Electronic Speed Control; Preset Programs - Breville BBL620/W Instruction Manual

MANUAL SPEED SELECTION

ON | OFF
The ON | OFF button powers the unit into
READY mode.

ELECTRONIC SPEED CONTROL

There are 5 electronic speed buttons from MIX
through to LIQUIFY.
MIX combines more delicate foods with a
folding motion, and is good for combining wet
and dry ingredients.
LIQUIFY is the fastest setting, and is ideal for
breaking down ingredients to make cocktails
and other finely blended mixtures.
Select the required speed (1 to 5) by pressing
the corresponding speed button. The blender
will start to operate and the selected speed
button will illuminate. The ON | OFF button
will illuminate and cease to flash.
The LCD timer screen will start counting up
in one second increments until 120 seconds is
reached.
NOTE
Operate the blender only for the appropriate
amount of time required – do not over blend.
When 120 seconds is reached, the blender will
automatically stop blending and the selected
speed button illumination will go out.
The ON | OFF button will illuminate and flash.
After a few seconds the LCD timer screen will
revert to '00'.
• The Breville Blender will automatically stop
blending after 120 seconds. This is a safety
feature and restricts wear on the motor.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go
out. The number of seconds on the LCD
timer screen will continue to count upwards
to 120 seconds unless interrupted.
Count-up timer
The blender timer counts up in seconds as it
blends on one of the 5 electronic speeds from
MIX to LIQUIFY. When using the timer this
way, the blender will stop after 2 minutes.

PRESET PROGRAMS

Your Breville Blender features three additional
functions, 'AUTO PULSE/ICE CRUSH',
'GREEN SMOOTHIE' and 'SMOOTHIE'.
These three pre-programmed cycles
automatically adjust the blending time and
speeds to optimise blending results. The
maximum amount of ice cubes the blender can
blend at any one time is 1 standard ice tray or
250g. Select the required function by pressing
the corresponding function button. The
blender will start to operate and the selected
function button will illuminate. The ON | OFF
button will illuminate and stop flashing. The
LCD timer screen will start counting down in
one second increments until '00' is displayed.
9