Advertisement
Device care
- Wash Depth thoroughly with fresh
water after each dive and let the pressure
sensor dry out.
- Never leave Depth in the sun or a hot
car for extended periods.
- Never drop Depth. Depth contains
sensitive electronics that can be
damaged by drops.
- Never charge Depth when the device is
at or near 0°C.
- Never crush Depth.
- Never expose Depth to temperatures greater
than 60°C.
- Never dive below 150m with Depth.
- If your Depth unit experiences any persistent
malfunctions or is significantly damaged,
please refer to the "Warranty + Repair"
section of this manual.
5
hardware overview
Depth is a fully-sealed device made of
a polymer casing with a lanyard hole,
multifunction button, indication LED,
mask clip interface rails and a pressure
sensor grill.
Its casing conducts vibrations from an
embedded bone conduction transducer,
allowing you to clearly hear music or
Depth's vocal assistant.
Depth's tap detection circuit is located
directly in the center of mass.
mask
lanyard
clip rail
hole
pressure
multifunction
indication
sensor
button
LED
6
Advertisement
