Page 1
Parts (China) 400-630-8866 www.moen.cn Image is for reference only (Style varies by model) HELPFUL TOOLS For safety and ease of replacement, Moen recommends the use of these helpful tools. Pencil Phillips Screwdriver Thread Seal Tape Record Purchased Model Number: (Save instruction sheet for future reference)
Page 2
Parts List A. Expansion Tube B. Gasket C. Wall Seat D. Screw 1 E. Connector F. Self-tapping Screws G. Decorative Cover H. Screw 2 Icon Legend CAUTION — TIPS FOR REMOVAL OF OLD FAUCET: Always turn water supply OFF before removing existing faucet or disassembling the valve. Open faucet handle to relieve water pressure and ensure that complete water shut-off has been accomplished.
Page 3
2-14mm ø42 max 7-19mm Option ø42 max 5/32" Wrap the installation screw with raw tape Put the spirit level on the main body of and connect it to the water inlet pipe. Pay Put the G1/2 screw Connector (E) in the the faucet to test whether it is tilted.
Page 4
Screw on the Screw (D) as shown in the Tighten the faucet completely with a Use a spirit level to align the faucet. figure, and install the Decorative Cover strap wrench. (G) on the faucet. 1/16" Remove the Decorative Cover (G) as Install the faucet on the wall as shown in The installation is completed.
Page 5
Pull the faucet as shown in the picture. Turn on the tap switch to test whether Turn off both handles when not in use. the water is normal.
Page 6
MOEN LIMITED WARRANTY We offer limited warranty and lifetime maintenance for Moen products, which are all manufactured with high standards of workmanship. The period of warranty shall start from the date of purchase of the product (according to the invoice or...