Advertisement
11-2. Disassembly Assembly
1) Remove a release paper of LCD backside.
2) Put LCD FPCB through PCB Hole.
3) Adjust LCD corner aligned with PCB silk line
and assemble LCD.
※ Caution
1) Be care of damage to LCD Panel.
1) Place Shield can on PBA.
2) Assemble the Shield can screw - 2 point.
※ Caution
1)
Be care of damage to PBA
2) Torque : 1.1 ~ 1.3 Kgf·cm
Size : M1.4 x L2.0
1
3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) Assemble LCD FPCB to Connector.
※ Caution
1) Be care of damage to LCD FPCB
1) Assemble CIF Camera connector.
2) Assemble Speaker mold FPCB
※ Caution
1) Be care of damage to FPCB
11-4
2
4
Advertisement
