Sealey SV20 Series Quick Start Manual page 2

Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any
9
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with these power tools or these instructions to
9
operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or biding of the moving parts, breakage of parts and any other condition
9
that may affect the power tool's operation. If damages, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
Use the power tool, accessories and tool bits etc, in accordance with these instructions,taking into account the working conditions and
9
the work to be performed. Use of the power tool for operations different from those intended could results in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
9
handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
9
2. INTRODUCTION
Powerful, lightweight cordless impact wrench. Durable composite housing with soft grip for added comfort. Variable speed trigger
switch as well as three selectable speed settings for maximum control. All metal gear construction for ultimate durability and
performance. Built-in LED worklight. Forward, reverse and trigger-lock. Fitted with electronic brake. Supplied with belt hook for safer
storage whilst not in use. Requires compatible 20V battery and mains charger, sold separately.
3. SPECIFICATION
Model No.. .................................................... CP20VXIW
Battery: ........... 20V 2Ah - 6Ah Lithium-ion (not included)
Breakaway Torque: ...........................1450Nm(1,069lb.ft)
Consumable parts
CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery,
CP20VBP6 - 6Ah Battery
Drive: .......................................................... 1/2"Sq Drive
Fastening Torque: ................................ 1150Nm(842lb.ft)
Impact Rate: ....................... 0-1800, 0-2000, 0-2200bpm
No-Load Speed: ..................... 0-900, 0-1200, 0-1800rpm
4. OPERATION
4.1. Fit the socket to the wrench by snapping it onto the square drive.
NOTE: Use only impact grade sockets.
4.2. Fit the battery pack to the wrench by aligning the tongue on the battery with the groove in the housing and slide into place. Ensure
that the battery pack is firmly located, a click will be heard when it has locked into position.
4.3. Select the required direction of rotation. To change direction, turn the direction control (fig.1) to the left or right. DO NOT attempt to
change the direction of rotation whilst trigger is depressed.
4.4. Speed can be controlled by varying the finger pressure on the trigger. Initial pressure will switch on the work light.
IMPORTANT: IMPORTANT: When tightening, take care not to over-torque small fixi When tightening, take care not to over-torque small fixings.
NOTE: On critical fixings always check the torque with a torque wrench
according to the product or vehicle manufacturer's guidelines.
4.5. The base on the impact wrench has three selectable speed settings which are
indicated by LED lights to limit the impact wrenches speed.
5. MAINTENANCE
WARNING: Always disconnect the battery before carrying out any
‰
inspection, maintenance or cleaning.
5.1. GENERAL INSPECTION
5.1.1. Regularly check that all the fixing screws are tight. Repairs should be
carried out by an authorised service centre.
5.2. CLEANING
WARNING: Always wear protective equipment including eye protection and
‰
gloves when cleaning this tool.
5.2.1. Keep your tool clean at all times. Dirt and dust will cause internal parts to
wear quickly, and shorten the device's service life.
5.2.2. Clean the body of your machine with a soft brush, or dry cloth.
5.2.3. Never use caustic agents to clean plastic parts. If dry cleaning is not
sufficient, a mild detergent on a damp cloth is recommended.
5.2.4. Water must never come into contact with the tool. Ensure the tool is
thoroughly dry before using it.
5.2.5. If available, use clean, dry, compressed air to blow through the ventilation holes (where applicable).
5.3. LUBRICATION
5.3.1. Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant.
5.4. STORAGE
5.4.1. Store this tool carefully in a secure, dry place out of the reach of children.
5.5. BATTERY TOOL USE AND CARE
5.5.1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips,coins, keys, nails, screws, or other small metal
objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for
each tool.
© Jack Sealey Limited
Original Language Version
Trigger
Three selectable speeds with
LED lights.
CP20VXIW Issue 1. 14/07/23
fig.1