Advertisement
Quick Links
Operation Manual
Workbench with Cupboard
60238
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for XPOtool 60238
Summary of Contents for XPOtool 60238
- Page 1 Operation Manual Workbench with Cupboard 60238 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 60238 Page 2 The Tool Experts 03 2023-1...
- Page 3 Please read the operation instruc- tions carefully and make sure you have understood its content. Keep these operation instructions safe. Parts list https://www.XPOtool.com Item 60238 Page 3 The Tool Experts 03 2023-1...
- Page 4 Drawer back Perforated wall panel Front frame Washer Cover panel Stand Divider Upper door hinge Door Lower door hinge Self-locking Table leg screw Sliding rail Tapping screw Drawer bottom https://www.XPOtool.com Item 60238 Page 4 The Tool Experts 03 2023-1...
- Page 5 2. Turn the cabinet around to attach the floor (fig. 3). 3. Then push the divider slightly tilted into the cabinet. Place it vertically and fix it with the tapping screws (fig. 4). https://www.XPOtool.com Item 60238 Page 5 The Tool Experts 03 2023-1...
- Page 6 Place the furniture into its regular positioning again and place the metal frames on each side of the cabinet. 2. Attach the table legs with the included angled tapping screws (fig. 6). 3. Then attach the stands to the table legs (fig. 7). https://www.XPOtool.com Item 60238 Page 6 The Tool Experts 03 2023-1...
- Page 7 Finally mount the work surface onto the frame. On each side of the frame there are three holes, which are used to connect the frame with the work surface via tapping screws. 2. The drawer can then be mounted beneath the work surface (fig. 9). https://www.XPOtool.com Item 60238 Page 7 The Tool Experts 03 2023-1...
- Page 8 Clean the cabinet with a damp, soft cloth and wipe it afterwards with a clean dry cloth. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 60238 Page 8 The Tool Experts 03 2023-1...