Zenith ZODIAC CH 601 Series Manual page 2

Step # Check
1 [ ] 6SV3-6 HDS Rear Bottom Skin .016
(the Skin is PRE-DRILLED for the Ribs L stiffeners & trailing edge)
1 [ ] 6SV3-5 HDS Rear Top Skin .025
(the Skin is PRE-DRILLED for the Ribs L stiffeners & trailing edge)
1 [ ] L Angles (length = 4feet)
1 [ ] Tool: 1 x 2 furring strip (3/4" board) 4 feet long.
2 [ ] 6SV4-2HDS O/B Splice Plate
2 [ ] 6V7-11Rear Zee
9 [ ] 6SV2 HDS Tapered O/B Main Spar.
(The Spar is PRE-DRILLED for the Rib stations)
10 [ ] 6SV1-1S6 to 6SV1-1S9HDS Nose Ribs.
10 [ ] 6SV3-2HDS Wing tip Ribs
11 [ ] 6SV1-2S6 to 6SV1-2S9HDS Rear Rib.
16 [ ] Tool: Crimping tool (see page 5 of the Construction Manual).
21 [ ] 6SV3-4Leading Edge (tapered)
22 [ ] Tool: 1" wide ratchet type straps: 12ft
22 [ ] Tool: two straight 4 foot beams.
23 [ ] 6V3-1Tie Down Ring
25 [ ] 6SV4-3HDS Fiberglass wing tip
26 [ ] 6SV3-1 HDS Ailerons Skins
26 [ ] 6V10-3Aileron Ribs .016
27 [ ] 6V10-31Aileron Root Rib .025
30 [ ] 6SV3-3Aileron Tip Rib
32 [ ] 6SV4-5Wing Locker Door
33 [ ] 6SV4-4HDS Channel
34 [ ] Piano Hinge length = 540mm
35 [ ] AJ5-30 Dzus fasteners
35 [ ] S5A-2255 Dzus Spring
SIGNATURES: Builder _____________________________________ date
Inspector ____________________________________ date
HDS OUTBOARD WINGS WORK REPORT
Parts / Tools Qty
2
2
20
1
2
2
1L+1R
4L +4R
1L + 1R
4L+4R
2
6
2
1L + 1R
2
3L + 3R
2
1L + 1R
2
2
2
16
16