Buffalo HJ326 Assembly Instructions

HEAVY DUTY WORKBENCH
ASSEMBLY INSTRUCTIONS
Follow Manual Follow Manual
Carefully Carefully

SET UP

• 2 PEOPLE REQUIRED
• PROTECT FLOOR WITH MAT
• WEAR GLOVES WHEN ASSEMBLING
• ENSURE COMPONENTS ARE IN GOOD
CONDITION BEFORE ASSEMBLING
• SET POWER TOOLS TO LOW SPEED
• DO NOT TIGHTEN SCREWS UNTIL
FULLY ASSEMBLED

STEP 1

• ATTACH P2 FRAMES TO P1 TABLE TOP
USING F1 FASTENINGS.

STEP 2

• ATTACH P4 SIDE SUPPORTS TO P2 LEG
FRAMES ON EITHER SIDE USING F2
FASTENERS AND F3 NUTS.
Keep Small Do Not Exceed Keep Away from
Parts Away from Weight Limit Children
Children

PARTS

P5 x 4
WWW.BUFFALOSHELVING.CO.UK
Do Not Climb Keep Away from Handle and
Fire Dispose of Parts
Properly
P1 x 1
P4 x 2
P6 x 4 F1 x 22 F2 x 8
HJ326
Watch the Assembly Video!
P2 x 2
F3 x 16 F4 x 8