Ozito DAL-230 Instruction Manual

MAINTENANCE
WARNING! BEFORE CLEANING YOUR TOOL OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE POWER SUPPLY HAS BEEN
REMOVED OR DISCONNECTED TO PREVENT
ACCIDENTAL STARTING.
Cleaning
Clean the appliance regularly with a soft cloth. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in
the appliance. Ensure that no water can get into the interior of the
appliance.
Storage
Switch off the tool and store it in a dry location which is not accessible
to unauthorised persons.
The tool can also be hung up out of the way by the hanging hole.
HOLD
ON/OFF
DIGITAL ANGLE FINDER
Remove the battery before storage if the tool will not be in use for a
long time.
DESCRIPTION OF SYMBOLS
V Volts DC Direct Current
Regulatory Compliance Mark
°
Degrees
(RCM)
Read Instruction Manual Warning

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au