Summary of Contents for HSF TIG-MAX XT 2500
- Page 1 XT 2500 I XT 4000 I XT 6000 XT 2500 I XT 4000 I XT 6000 XT 7000 I XT 9000 XT 7000 I XT 9000 operating instructions...
-
Page 2: Table Of Contents
Polishing with XT 7000 / XT 9000 Page 25 trouBLesHooting Page 22 care and Maintenance Page 22 7.1. Device disposal Page 22 tecHnicaL data Page 23 Page 3 Page 2 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 3: Safety Precautions
Protection against ingress of solid foreign bodies Ø> 12mm, • Protection against spray water up to an angle of 60° from the vertical. Page 5 Page 4 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 4: Tips - Care - Maintenance
3. If hard deposits pads form on or in the threads of the brush, wand or handle, clean them with a miniature wire brush. The threads could otherwise seize and the cleaning perfor- mance could be reduced or completely lost. Page 7 Page 6 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 5: Tig-Max ® Xt 2500
To maintain full performance, we recommend placing the brush in residues well with water. warm water to remove any remaining liquid. Page 9 Page 8 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 6: Polishing
The result is a high brush and electrolyte consumption! The result is a high brush and electrolyte consumption! Page 11 Page 10 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... - Page 7 TIP: Excessive smoke is an indication of too high a power setting. The result is a high brush and electrolyte consumption! Page 13 Page 12 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de...
-
Page 8: Polishing
TIP: Excessive smoke is an indication of too high a power setting. The result is a high brush and electrolyte consumption! Page 15 Page 14 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 9: Cleaning
Clean contacts and threads well. The brush must be removed from the wand and carefully cleaned. To maintain full performance, we recommend placing the brush in warm water to remove any remaining liquid. Page 17 Page 16 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 10: Polishing
To maintain full performance, we recommend placing the brush in residues well with water. warm water to remove any remaining liquid. Page 19 Page 18 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 11: Tig-Max ® Xt 9000
30 % – Cleans at 30% of the maximum current carefully cleaned. To maintain full performance, we recommend placing the brush in warm water to remove any remaining liquid. Page 21 Page 20 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... -
Page 12: Polishing
To maintain full performance, we recommend placing the brush in residues well with water. warm water to remove any remaining liquid. Page 23 Page 22 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... - Page 13 The result is a high brush and electrolyte consumption! Continue with the 6th setting! XT 7000 Page 25 Page 24 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de...
-
Page 14: Troubleshooting
Weight 17.0Kg Weight 17.0Kg materials.“ Protection class IP23 Protection class IP23 EMC class EMC class The machines fulfil the requirements for CE and S classification. Page 27 Page 26 P +49 2776 92278-0 | F +49 2776 92129-5 | www.hsf-group.de | info@hsf-group.de... - Page 15 No part of this publication may be reproduced in whole or in part, copied, scanned or stored in electronic databases. HSF GROUP GmbH is prosecuting violations of its rights by using available legal means. Technical changes, further developments and errors excepted. Dated: 09/2022...
Need help?
Do you have a question about the TIG-MAX XT 2500 and is the answer not in the manual?
Questions and answers