Satellite Dish Connection; Speaker Output Setup; Ci Module Connection; Usb Connection - LG LV64 Series Owner's Manual

Satellite dish connection

(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω).

CI module connection

(Depending on model)
View the encrypted (pay) services in digital TV mode.
• Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

USB connection

Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.
• Use USB 1 port when connecting a webcam. USB 2 port may not
support some webcam. (Depending on model)

Speaker output setup

(Depending on model)
EXTERNAL
SPEAKER OUT
STEREO
(8 )
VOLUME
CONTROL
Control port for Speaker out
+
-
VOLUME CONTROL
GND
+
RIGHT
-
LEFT
GND
: Depending on model
• Use only with the 3 Pole 3.5 mm Stereo Jack.
• Do not connect your headphones or earphones to the port for
connecting an external speaker.
Method of volume control port
(Depending on model)
• Cable Spec.
GND / UP / DOWN
or
UP
DOWN
Each Up / Down pin
is pulled to 3.3 V with
CPU GPIO.
CPU detects transition
from 3.3 V to GND level
for volume control.
11