Advertisement
Available languages
Available languages
The procedure for installing the activated carbon filter is as follows.
1. Slide the front part of the cooker hood.
2. The aluminium filter should be detached first. Press the lock and
pull it downward.
3. Take out the carbon filter by rotating the carbon filter anti-
clockwise.
4. Replace the new carbon filter.
5. At the end, place aluminium filters again.
Make sure the filter is tightly closed. Otherwise, it would
loosen and cause danger. When the activated carbon filter is
connected, the suction power will be reduced.
It is compatible with following extractor hoods models:
UCEXTCC-18 / OHO 1613 M.
7
Advertisement
