Download Print this page

Assembly And Installation; Using Your Appliance - universalblue USPAE3321-22 User Manual

Advertisement

Available languages

Available languages

ENGLISH
to be operated by means of
an external timer or separate
remote control system.
The temperature of accessible
surfaces may be high when the
appliance is operating
The surfaces are liable to get hot
during use
Connect the appliance to an
earthed wall socket
Position the appliance so that:
The power cord is not hanging
• 
over the edge of the table or
sink;
It is standing on a flat surface
• 
with sufficient free space
around it.
Never put the power cord near
• 
to or in contact with the hot
surface of the appliance.
Always preheat the cooking
• 
plate before starting to cook.
Unplug the appliance after
• 
use.
Avoid touching the metal
• 
parts as they become very hot.
PRODUCT FEATURES
The contents of the package will contain
the following. See pictures 01 on pages 4.
Note: The picture is for reference only. The
content may vary depending on the model.
Packaging content:
Sandwichmaker
1. Clip
2. Upper cover
3. Iron cover
You can check the product features in table
01 on page 5.
12

ASSEMBLY AND INSTALLATION

Before using this appliance, remove the
packaging and inspect the grill. If the
appliance may be damaged, please contact
the store where you purchased it.
This product does not need to be assembled,
it´s ready to be used after unpacking it.

USING YOUR APPLIANCE

Before using the device, we recommend
the following functions:
• Clean the baking plates with a damp
cloth or sponge.
• Slightly grease the baking plates with a
little butter or cooking oil.
• Plug in the sandwich maker and heat
up the plates until the blue Ready to
cook pilot light goes off. The sandwich
maker is ready for use.
When
sandwich maker for the
first time, a fine smoke
haze may result. This is
normal because of the
initial heating of the internal
components.
• Making toasted sandwich
• Put the mains plug into the wall socket.
The green power light and blue power
light will both illuminate to show that
the sandwich maker is heating.
• Prepare the bread and filling for your
sandwich while sandwich maker is
pre-heating.
• Wait until the blue on pilot light gets
off. , the sandwich maker is then at the
correct temperature for use.
• To obtain an even golden brown result,
you can slightly butter the side of the
bread in contact with the plate.
• Lay the slices of bread with the buttered
side on the lower cooking plate, place
your filling and cover with the second
using
this

Advertisement

loading