Download Print this page

Harman Kardon TD262 Instruction Manual page 7

Ultrawideband linear phase cassette deck
Hide thumbs Also See for TD262:

Advertisement

T
D
2
6
2
/
T
D
2
1
2
Set-Up
Dolby HX Pro eliminates this problem by monitoring the
signal level and constantly adjusting the bias so that the deck is
always recording optimally. Not only is signal quality
significantly improved, but recording headroom is also
dynamically extended. Bets of all, it requires no special
playback circuitry, so you can make a tape with HX Pro and
enjoy the benefits in your car, with a portable cassette player,
or when playing the tape on a friend's cassette deck.
There is no button to turn on Dolby HX Pro. Because it is
compatible with any cassette deck during playback, it operates
automatically when you make a recording with the TD262.
Figure 2 TD262 Rear Panel
Save all packing material from your new Hannan Kardon
cassette deck. While the box is quite large and may be a
nuisance to store, it is essential for shipping if you move or
should the unit ever need repair.
Also be sure to fill out the customer profile card and save your
sales receipt in a safe place. It is necessary to establish the date
on which your warranty begins, and as proof of ownership in
the event of something drastic such as fire or theft.
The TD262 /TD212 is fully shielded and may be placed on top
of or under other stereo components, provided that its 3/8 -inch
"feet" provide sufficient clearance for the cooling needs of the
component below.
The cassette deck's inputs and outputs are connected to the
TAPE MONITOR connections of your preamplifier, integrated
amplifier or receiver using the hook-up cables provided.
If you are using external signal processing components such as
equalizers, dynamic expanders or surround sound processors
which are now connected to your TAPE MONITOR loop, you
have two choices.
If your pre-amp/integrated amp/receiver has two tape monitor
loops and you do not wish your new cassette deck to interact
with any components connected to TAPE MON. 1, connect
the deck to TAPE MON. 2.
Connect the TD262 / TD 212 to the TAPE MON. loop
provided on the last outboard component.

Advertisement

loading

This manual is also suitable for:

Td212