Settings - AEG LTN6K6210B User Manual

8.8 Inicio/Pausa
Touch the Inicio/Pausa button to start, pause
the appliance or interrupt a running
programme.

9. SETTINGS

9.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the Inicio
Diferido and the Extra Rápido buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
9.2 Child Lock
With this option you can prevent children from
playing with the control panel.
• To activate/deactivate this option, touch
the Centrif. and the Opc. buttons
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
• After you touch the Inicio/Pausa button: all
the buttons and the programme dial are
deactivated (except On/Off button ).
• Before you touch the Inicio/Pausa button:
the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.3 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
the Temp. °C button and the Centrif.
button simultaneously until relevant
indicator comes on/goes off on
display.
9.4 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
18 ENGLISH
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Inicio Diferido and
Extra Rápido buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
9.5 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the
Sintéticos programme (3rd position
clockwise).
3. Press and hold the Inicio Diferido and
Extra Rápido buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).