Advertisement
Quick Links
MULT-K
DC 96 PLUS
❶ Knowing the product
Ⓑ
Ⓒ
Ⓓ
❷ Installing the Product
Accomodate the meter on the panel cutout and fasten it using the side locks
92x92mm.
❸ Power Supply Connection
Power Supply signal must be applied to the Ⓕ terminal bloc.
External Power Supply
36...72Vd.c.
2 (+)
❹ Voltage Input Connections
Connect the terminals to input
Terminal Description
10 / U+
9 / U-
Faixa de medição: 2 a 60Vcc
Quick Installation Guide – DC 96 PLUS Revision 1.1 – December, 2023
Ⓔ
Ⓐ
Ⓗ
Ⓘ
Ⓖ
1 (-)
Ⓖ
following the order
Signal to be Connected
Positivo
Negativo
Ⓐ
DC 96 PLUS Meter
LED Display with 2 lines
Ⓑ
(Measurements and Settings )
Ⓒ
Scale indicator LED k
Ⓓ
Navigation keys
Ⓔ
Lateral locks
Ⓕ
Ⓔ
The operating range of this source is 36...72V DC.
Pay attention to the voltage level that will be
applied. Incorrect connection may damage
❺ Current Input Connections (Shunt)
Connect the poles to input
Terminal Description
8 / I+
Quick Installation Guide
Ⓕ
Auxiliary Supply
Ⓖ
Ⓗ
Shunt Connection
Ⓘ
. Panel's cutout dimensions must be
ATTENTION
the instrument.
Ⓗ
following the order.
Signal to be Connected
Positivo
7 / I-
Negativo
Faixa de medição: 1 a 60mVcc
(Shunt)
Input Voltage
RS-485 Port
Advertisement
Summary of Contents for Kron DC 96 PLUS
- Page 1 Signal to be Connected 9 / U- Negativo 8 / I+ Positivo Faixa de medição: 2 a 60Vcc 7 / I- Negativo Faixa de medição: 1 a 60mVcc (Shunt) Quick Installation Guide – DC 96 PLUS Revision 1.1 – December, 2023...
- Page 2 To change the decimal point, click again and use to navigate between digits. After making the desired configuration, click the button to save the modification. Quick Installation Guide – DC 96 PLUS Revision 1.1 – December, 2023...
- Page 3 One should consider the magnitude of Energy (E). The value presented is cumulative, meaning that to obtain the energy consumption for a specific period, one must subtract the current reading from the previous reading. Quick Installation Guide – DC 96 PLUS Revision 1.1 – December, 2023...
Need help?
Do you have a question about the DC 96 PLUS and is the answer not in the manual?
Questions and answers