CENTRAL 58967 Owner's Manual & Safety Instructions

3" multipurpose bench grinder

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual (or month and year of purchase if product has no number). Keep this manual and the

receipt in a safe and dry place for future reference.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2018 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

22h

Table of Contents

Need help?

Do you have a question about the 58967 and is the answer not in the manual?

Questions and answers

Summary of Contents for CENTRAL 58967

Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Page 2: Important Safety Information
Cluttered areas and benches invite accidents. master switches, or by removing starter keys. 7. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. Page 2 For technical questions, please call 1-888-866-5797. Item 58967...
Page 3 TURN POWER OFF. Don’t leave tool hold work when practical. It’s safer than using your until it comes to a complete stop. hand and it frees both hands to operate tool. Item 58967 For technical questions, please call 1-888-866-5797. Page 3...
Page 4 0.125 inch or less separation as the 14. Do not depress the spindle lock (if applicable) diameter of the wheel decreases with use. when starting or during operation. 8. Frequently clean grinding dust from beneath grinder. Page 4 For technical questions, please call 1-888-866-5797. Item 58967...
Page 5: Vibration Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 58967 For technical questions, please call 1-888-866-5797. Page 5...
Page 6 2. Adjust the Work Rest Support (38) to within Support (38) 1/16″ of the Grinding Wheel. To adjust this distance, loosen Knob Tensioner (59) and move Work Rest Support (38). Wheel Guard (17) Figure A: Page 6 For technical questions, please call 1-888-866-5797. Item 58967...
Page 7 Wheel Guard (17, 28) Screw (58) Figure B: 6. Adjust the Safety Shields (54) so the Wheels (2, 11) are visible through the Safety Shields (54) to protect the operator′s eyes. Item 58967 For technical questions, please call 1-888-866-5797. Page 7...
Page 8 Safety polishing Shield (54) Wheel (2) Grinding Wheel (11) Speed control Flex Shaft (32) Knob (31) power Switch (52) Mounted Stone Bit (48) collet (46) Wrench (50) collet Nut (47) Page 8 For technical questions, please call 1-888-866-5797. Item 58967...
Page 9: Workpiece And Work Area Set Up
3. There must not be objects, such as utility lines, nearby that will present a hazard while working. Item 58967 For technical questions, please call 1-888-866-5797. Page 9...
Page 10 Flex Shaft. 4. Loosen the Collet Nut (47) with the Wrench (50). 8. Disconnect the Flex Shaft (32) from the Wheel Cover (14) when not in use. Page 10 For technical questions, please call 1-888-866-5797. Item 58967...
Page 11: Cleaning, Maintenance, And Lubrication
Do not use wheels drawers. Keep storage area dry and above that have been dropped or bumped. freezing. Any grinding wheels exposed to humidity or freezing temperatures must not be used. Item 58967 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Troubleshooting
If an extension cord is needed, use one with the proper diameter for its length and load. See Table A on page 3. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 58967...
Page 13: Please Read The Following Carefully
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 58967 For technical questions, please call 1-888-866-5797. Page 13...
Page 14: Parts List
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175452061 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 58967...
Page 15: Assembly Diagram
Assembly Diagram Item 58967 For technical questions, please call 1-888-866-5797. Page 15...
Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.