Thank you for purchasing this Device The Simplified MFG TX1PRO was designed to provide years of reliable service. At Simplified MFG we want your experience with this device to be the best possible and are committed to helping achieve that experience. Please read and keep this manual for future reference.
1080p signal up to 230ft (70m) between transmitter and receiver (HDBaseT certified display) via a single CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. The TX1PRO was designed specifically for use with HDBaseT enabled projectors.
IR In Will send IR signals to RX if RX portion is equipped to receive them. IR receiver is supplied IR Out IR TX (Flasher) connects here and outputs IR from RX IR input if equipped RS-232 3-Pin Phoenix connector for RS-232 pass-through. TX, ground, & RX are indicated on the metal chassis DC 24V Power Supply connection...
6. Application Example The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 7 / 8...
Need help?
Do you have a question about the TX1PRO and is the answer not in the manual?
Questions and answers