BETCO FASTDRAW FOAMER II Technical Manual

Please use this equipment carefully and observe all warnings and cautions.
• Protective clothing and eyewear when dispensing chemicals or other materials or when working
in the vicinity of all chemicals, filling or emptying equipment, or changing metering tips. Use
WEAR
Betco
®
other than products manufactured by Betco
the system from operating properly.
• Observe safety and handling instructions on the product label.
• Direct discharge away from you or other persons or into approved containers.
• Dispense cleaners and chemicals in accordance with the product label. Exercise CAUTION when
maintaining your equipment.
ALWAYS
• Reassemble equipment according to instruction procedures. Be sure all components are firmly
screwed or latched into position.
• Always shut off water and disconnect hose after use. This is a TEMPORARY CONNECTION
NOT FOR PERMANENT INSTALLATION.
KEEP
• Equipment clean to maintain proper operation.
FOAMER II
92216-00
Technical Manual
FastDraw products only, use of any other products through the FastDraw
®
Corporation, will void all warranties and prevent
®

Package Should Contain

1. FastDraw Foamer II
®
2. Instruction sheet
system,
®