Shutter Release; Trigger; Lock-Run Control; Cable Release Socket - Nikon R10 SUPER ZOOM Instruction Manual

SHUTTER RELEASE
•
Trigger
The trigger activates the exposure
meter and the film feed electro-
magnetically. Lightly depressing the
trigger halfway switches on the
meter. Squeeze the trigger all the
way when you are ready to shoot.
The camera will stop without a trace
of run-on when you release the
trigger.
Caution; To prevent overexposure of the
initial frames of each shooting sequence, it
Is essential that you observe these di'-
rections for a two-step triggering action.
Use an Initial light-pressured squeeze to
turn on the meter; after the meter needle
has stabilized, apply full pressure to trigger
for filming.
Lock-Run Control
The lock-run control locks the
camera in the running position for
continuous filming. Squeeze the
trigger and depress the L side of the
control. To stop the camera, push
the R side. If you want to get in the
movie yourself, mount the camera on
a tripod or other firm support and
set the camera for continuous run¬
ning. The lock-run control also serves
to prevent accidental triggering
between takes.
Cable Release Socket
This accepts a standard cable release.
It is recommended for use in making
critical exposures such as close-ups,
panning, fading or single-frame ex¬
posures with the camera mounted on
a tripod.
12—SHUTTER RELEASE